Skip to content

Ashland Fire and EMS Frequencies

Ashland in Cass County, Illinois has 2 conventional frequencies and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Atterberry (STARCOM21 Statewide Illinois), about 15 miles away.

About Ashland Fire and EMS Frequencies

Quick answer: Fire dispatch for Ashland: Ashland Fire 154.2500 MHz, narrow FM, 114.8 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Ashland conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ashland
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashland FireAshland Fire – Dispatch / Operations154.2500114.8 PLFMNWPDQ312
Ashland FireAshland Fire – Tone-Outs154.2500CSQFMNWPDQ312

Cass County channels that also cover Ashland

Fire Dispatch

Fire Dispatch frequencies for Cass County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cass County Sheriff / 911Cass County Sheriff / 911 – Paging – Countywide (Repeats 159.105)157.5150411 DPLFMN—
Cass County Sheriff / 911Cass County Sheriff / 911 – Paging – Countywide159.1050
In 156.0000
411 DPLFMNWPOY929

Nearest trunked radio sites

Distances are measured from the center of Ashland.

Atterberry · STARCOM21 Statewide Illinois
RFSS 2 · Site 32 (hex 20) · NAC 147 · about 15 mi away
Control 851.95, 852.475, 853.3125
Voice 851.425, 853.8875, 859.3625
Bluff Springs · STARCOM21 Statewide Illinois
RFSS 2 · Site 9 (hex 9) · NAC 14C · about 16 mi away
Control 770.66875, 774.03125, 860.8375
Voice 769.96875, 858.8375, 860.8875
Springfield · STARCOM21 Statewide Illinois
RFSS 2 · Site 30 (hex 1E) · NAC 14A · about 20 mi away
Control 852.325, 852.85, 853.375
Voice 851.1125, 851.4875, 852.075, 852.675, 857.3625, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ashland?

Fire dispatch channels listed for Ashland: Ashland Fire 154.2500 MHz, narrow FM, 114.8 PL.

What scanner do I need to listen to fire and EMS in Ashland?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ashland?

For Ashland, start with the Atterberry site of STARCOM21 Statewide Illinois. Its control channels are 851.95, 852.475, 853.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ashland fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Ashland are marked encrypted.