Skip to content

Ripley Fire and EMS Frequencies

We do not have frequencies listed specifically for Ripley in Brown County, Illinois yet. Countywide channels for Brown County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Mt. Sterling (STARCOM21 Statewide Illinois), about 8 miles away.

About Ripley Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ripley: Brown County Fire 151.4675 MHz, narrow FM, 031 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Brown County channels that also cover Ripley

Fire Dispatch

Fire Dispatch frequencies for Brown County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brown County FireBrown County Fire – Dispatch – Countywide151.4675
In 155.0025
031 DPLFMNWQJS768
Brown County FireBrown County Fire – Remote Link (from Morgan County)453.4875
In 458.4875
032 DPLFMNWQJS768

Nearest trunked radio sites

Distances are measured from the center of Ripley.

Mt. Sterling · STARCOM21 Statewide Illinois
RFSS 2 · Site 15 (hex F) · NAC 145 · about 8 mi away
Control 851.9125, 852.4375, 852.9625
Voice 851.3875, 853.4875, 854.8625
Bluff Springs · STARCOM21 Statewide Illinois
RFSS 2 · Site 9 (hex 9) · NAC 14C · about 19 mi away
Control 770.66875, 774.03125, 860.8375
Voice 769.96875, 858.8375, 860.8875
Augusta · STARCOM21 Statewide Illinois
RFSS 2 · Site 11 (hex B) · NAC 141 · about 20 mi away
Control 851.9375, 852.4625, 852.9875
Voice 851.4125, 853.875, 857.3125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ripley?

We do not have a fire dispatch channel listed specifically for Ripley. The county-level fire dispatch channels in the same county: Brown County Fire 151.4675 MHz, narrow FM, 031 DPL.

What scanner do I need to listen to fire and EMS in Ripley?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Ripley?

For Ripley, start with the Mt. Sterling site of STARCOM21 Statewide Illinois. Its control channels are 851.9125, 852.4375, 852.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.