Skip to content

Adams County Fire and EMS Frequencies

Adams County in Illinois has 6 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 35 cities and communities below for local fire departments and EMS agencies.

About Adams County Fire and EMS Frequencies

Quick answer: Fire dispatch for Adams County: Adams County Fire 154.3100 MHz, narrow FM, 107.2 PL. EMS dispatch for Adams County: Adams County EMS 151.2350 MHz, narrow FM, 245 DPL. Trunked: STARCOM21 Statewide Illinois, for example Adams County EMS talkgroup 4801 (hex 12c1).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Adams County, start with the Quincy site of STARCOM21 Statewide Illinois. Its control channels: 851.875, 852.4 MHz.

Data updated .

Adams County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County FireAdams County Fire – Dispatch – Mendon, Golden154.3100107.2 PLFMNWQWQ259
Adams County FireAdams County Fire – Dispatch – Main (Countywide)154.3100127.3 PLFMNWRBV246

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Payson / Fall Creek FirePayson / Fall Creek Fire – Local?155.6850FMNWQGK800

EMS Dispatch

EMS Dispatch frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adams County EMSAdams County EMS – Dispatch /Tone-Out (multicast on S21 TG 4801)151.2350
In 156.0675
245 DPLFMNKNJL469
Adams County EMSAdams County EMS – Mobile Extenders173.2250CSQFMNWQSX296

Hospitals & Medical

Hospitals & Medical frequencies for Adams County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blessing Hospital (Quincy)Patient Reports155.340088.5 PLFMNWSMH654

Adams County trunked talkgroups

STARCOM21 Statewide Illinois

STARCOM21 Statewide Illinois talkgroups
AgencyDescriptionTalkgroupHexMode
Adams County EMSAdams County EMS – Dispatch / Mobiles (MultiCast to 153.755?)480112c1D

Radio system sites in Adams County

Program the control channel first; your scanner finds the voice channels from it.

Quincy · STARCOM21 Statewide Illinois
RFSS 2 · Site 12 (hex C) · NAC 147
Control 851.875, 852.4
Voice 851.35, 852.925, 853.45, 855.1625, 858.3625
Kingston · STARCOM21 Statewide Illinois
RFSS 2 · Site 18 (hex 12) · NAC 148
Control 851.9875, 852.8125
Voice 851.4625, 853.45, 858.3625
Mendon · STARCOM21 Statewide Illinois
RFSS 2 · Site 33 (hex 21) · NAC 146
Control 851.85, 852.375, 852.9
Voice 851.325, 853.425, 858.3375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Adams County

Common questions

What frequency does the fire department use in Adams County?

Fire dispatch channels listed for Adams County: Adams County Fire 154.3100 MHz, narrow FM, 107.2 PL.

What frequency does EMS or the ambulance service use in Adams County?

EMS dispatch channels listed for Adams County: Adams County EMS 151.2350 MHz, narrow FM, 245 DPL.

Do fire departments and EMS use a trunked radio system in Adams County?

Yes. Fire and EMS talkgroups are listed for STARCOM21 Statewide Illinois: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Adams County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Adams County?

For Adams County, start with the Quincy site of STARCOM21 Statewide Illinois. Its control channels are 851.875, 852.4 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Adams County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Adams County are marked encrypted.

Are Adams County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Adams County are marked encrypted.