About Leadore Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Leadore: Leadore Community Volunteer Fire Dept. 154.4000 MHz, narrow FM, no tone; Lemhi County Fire 154.4300 MHz, narrow FM, no tone; North Custer Rural Fire Protection District 154.8600 MHz, narrow FM, no tone.
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Lemhi County channels that also cover Leadore
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Leadore Community Volunteer Fire Dept. | Leadore Community Volunteer Fire Department – Dispatch | 154.4000 | FMN | WPPW929 | |
| Lemhi County Fire | Lemhi County Fire – Dispatch | 154.4300 In 153.7700 | FMN | WPAN383 | |
| North Custer Rural Fire Protection District | North Custer Rural Fire Protection District – Dispatch | 154.8600 In 158.8500 | FMN | WPRR913 | |
| North Fork Fire Protection District | North Fork Fire Protection District – Dispatch | 154.3850 In 153.8300 | FMN | WPBW579 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Elk Bend Fire Protection District | Elk Bend Fire Protection District – Fire Ground | 158.7825 In 153.8075 | FMN | WQHU739 | |
| Lemhi County Fire | Lemhi County Fire – Tactical Channel | 150.7900 | FMN | WPAN383 | |
| Lemhi County Fire | Lemhi County Fire – Tactical Channel | 153.9950 | FMN | WPAN383 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lemhi County EMS | Search and Rescue – Tactical | 154.0850 | FMN | WQBE962 | |
| Lemhi County EMS | Search and Rescue – Primary | 155.1450 In 159.0000 | FMN | WQBE962 |
Nearest trunked radio sites
Distances are measured from the center of Leadore.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Leadore?
We do not have a fire dispatch channel listed specifically for Leadore. The county-level fire dispatch channels in the same county: Leadore Community Volunteer Fire Dept. 154.4000 MHz, narrow FM, no tone; Lemhi County Fire 154.4300 MHz, narrow FM, no tone; North Custer Rural Fire Protection District 154.8600 MHz, narrow FM, no tone; North Fork Fire Protection District 154.3850 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Leadore?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Leadore?
For Leadore, start with the Monida Pass site of Eastern Idaho Cooperative Agencies Wireless Interoperable Network (EICAWIN). Its control channels are 770.33125, 772.65625 MHz. Program a control channel first; the scanner finds the voice channels from it.