Skip to content

Latah County Fire and EMS Frequencies

Latah County in Idaho has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Latah County Fire and EMS Frequencies

Quick answer: Fire dispatch for Latah County: Deary Rural Fire District 155.2200 MHz, narrow FM, no tone; Potlatch Rural Fire District 155.5575 MHz, narrow FM, 136.5 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Latah County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Latah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Deary Rural Fire DistrictDeary Rural Fire District155.2200FMNWNXJ279
Potlatch Rural Fire DistrictFire/EMS Dispatch155.5575136.5 PLFMNWQGP520

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Latah County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Potlatch Rural Fire DistrictPotlatch Rural Fire District – Fire Ground154.3250FMNWPXR426

Radio system sites in Latah County

Program the control channel first; your scanner finds the voice channels from it.

West Twin · Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)
RFSS 1 · Site 34 (hex 22) · NAC 180
Control 770.43125, 773.06875, 773.55625, 773.84375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Latah County

Common questions

What frequency does the fire department use in Latah County?

Fire dispatch channels listed for Latah County: Deary Rural Fire District 155.2200 MHz, narrow FM, no tone; Potlatch Rural Fire District 155.5575 MHz, narrow FM, 136.5 PL.

What scanner do I need to listen to fire and EMS in Latah County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Latah County?

For Latah County, start with the West Twin site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN). Its control channels are 770.43125, 773.06875, 773.55625, 773.84375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Latah County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Latah County are marked encrypted.