About Stanley Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Stanley: North Custer Rural Fire District 154.8600 MHz, narrow FM, no tone. County-level ems dispatch that covers Stanley: Custer County EMS 155.4300 MHz, narrow FM, 131.8 PL; South Custer County Ambulance 155.3850 MHz, narrow FM, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Custer County channels that also cover Stanley
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| North Custer Rural Fire District | North Custer Rural Fire District – Dispatch | 154.8600 In 158.8500 | FMN | WPRR913 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County EMS | Sheriff/EMS Dispatch | 155.4300 In 158.7300 | 131.8 PL | FMN | WQS441 |
| South Custer County Ambulance | South Custer County Ambulance – Dispatch | 155.3850 In 150.7750 | FMN | WPPH449 | |
| South Custer EMS | South Custer EMS – Dispatch | 769.5313 In 799.5313 | P25 | WQOV889 |
Nearest trunked radio sites
Distances are measured from the center of Stanley.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Stanley?
We do not have a fire dispatch channel listed specifically for Stanley. The county-level fire dispatch channels in the same county: North Custer Rural Fire District 154.8600 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Stanley?
We do not have a EMS dispatch channel listed specifically for Stanley. The county-level EMS dispatch channels in the same county: Custer County EMS 155.4300 MHz, narrow FM, 131.8 PL; South Custer County Ambulance 155.3850 MHz, narrow FM, no tone; South Custer EMS 769.5313 MHz, P25, no tone.
What scanner do I need to listen to fire and EMS in Stanley?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Stanley?
For Stanley, start with the Ketchum site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN). Its control channels are 771.89375, 772.89375, 773.94375 MHz. Program a control channel first; the scanner finds the voice channels from it.