Skip to content

Weippe Fire and EMS Frequencies

We do not have frequencies listed specifically for Weippe in Clearwater County, Idaho yet. Countywide channels for Clearwater County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Lewiston (Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)), about 52 miles away.

About Weippe Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Weippe: Clearwater County Fire 155.1000 MHz, narrow FM, no tone; Clearwater Potlach Timber Protective Association 153.0650 MHz, narrow FM, 97.4 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clearwater County channels that also cover Weippe

Fire Dispatch

Fire Dispatch frequencies for Clearwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clearwater County FireClearwater County Fire – Countywide Dispatch155.1000
In 153.9050
FMNWQCV222
Clearwater Potlach Timber Protective AssociationClearwater Potlach Timber Protective Association – Dispatch – Elk Butte153.0650
In 158.1600
97.4 PLFMNWXU706
Clearwater Potlach Timber Protective AssociationClearwater Potlach Timber Protective Association – Dispatch – Elk Butte159.2700
In 151.2050
97.4 PLFMNKOE906

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clearwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire - Tactical Fire NetFire – Tactical Fire Net – Tactical Fire Net154.0400
In 156.0825
FMNWQCF940
Sunnyside Rural FireSunnyside Rural Fire – Tactical Channel154.2350FMNWPHT662

EMS Talk-around

EMS Talk-around frequencies for Clearwater County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clearwater County EMSClearwater County EMS – Alternate154.3100
In 155.2350
FMNWNWB580
Clearwater County EMSClearwater County EMS – Alternate155.3850
In 159.0300
FMNWQCL643

Nearest trunked radio sites

Distances are measured from the center of Weippe.

Lewiston · Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)
RFSS 1 · Site 28 (hex 1C) · NAC 180 · about 52 mi away
Control 774.90625
Voice 769.35625, 770.25625, 771.71875, 772.79375, 773.94375
West Twin · Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)
RFSS 1 · Site 34 (hex 22) · NAC 180 · about 55 mi away
Control 770.43125, 773.06875, 773.55625, 773.84375
Mason Butte (Worley) · Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)
RFSS 1 · Site 22 (hex 16) · NAC 180 · about 82 mi away
Control 771.98125, 773.66875, 774.65625
Voice 769.51875, 770.80625, 771.21875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Weippe?

We do not have a fire dispatch channel listed specifically for Weippe. The county-level fire dispatch channels in the same county: Clearwater County Fire 155.1000 MHz, narrow FM, no tone; Clearwater Potlach Timber Protective Association 153.0650 MHz, narrow FM, 97.4 PL.

What scanner do I need to listen to fire and EMS in Weippe?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Weippe?

For Weippe, start with the Lewiston site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN). Its control channels are 774.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.