Skip to content

Sumner Fire and EMS Frequencies

We do not have frequencies listed specifically for Sumner in Worth County, Georgia yet. Countywide channels for Worth County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tifton (Tift County Public Safety P25), about 15 miles away.

About Sumner Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sumner: Worth County Fire 154.3700 MHz, narrow FM, 100.0 PL. County-level ems dispatch that covers Sumner: Worth County EMS 155.1750 MHz, narrow FM, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Worth County channels that also cover Sumner

Fire Dispatch

Fire Dispatch frequencies for Worth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Worth County FireFire/EMS Dispatch154.3700
In 159.0600
100.0 PLFMNWPEC586

EMS Dispatch

EMS Dispatch frequencies for Worth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Worth County EMSWorth County EMS – Dispatch155.1750FMNWXT638

Nearest trunked radio sites

Distances are measured from the center of Sumner.

Tifton · Tift County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 671 · about 15 mi away
Control 856.9625, 857.4875
Voice 854.1875, 854.5125, 854.7875, 855.2375, 855.5875, 855.9375, 856.2625, 856.6125
Albany/Dougherty Co. Simulcast · Southwest Georgia Regional Radio System
RFSS 6 · Site 1 (hex 1) · NAC 8D1 · about 27 mi away
Control 856.4125, 856.7625, 857.2625
Voice 854.0125, 854.2125, 854.3875, 854.6125, 854.7125, 855.2125, 855.2875, 855.4875, 855.6125, 855.8875, 856.2125
Lee County · Southwest Georgia Regional Radio System
RFSS 6 · Site 3 (hex 3) · NAC 8D3 · about 27 mi away
Control 853.3875, 853.9375
Voice 851.2, 852.4375, 852.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sumner?

We do not have a fire dispatch channel listed specifically for Sumner. The county-level fire dispatch channels in the same county: Worth County Fire 154.3700 MHz, narrow FM, 100.0 PL.

What frequency does EMS or the ambulance service use in Sumner?

We do not have a EMS dispatch channel listed specifically for Sumner. The county-level EMS dispatch channels in the same county: Worth County EMS 155.1750 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Sumner?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Sumner?

For Sumner, start with the Tifton site of Tift County Public Safety P25. Its control channels are 856.9625, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.