Skip to content

Walton County Fire and EMS Frequencies

Walton County in Georgia has 3 countywide conventional frequencies and 10 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Walton County Fire and EMS Frequencies

Quick answer: Fire dispatch for Walton County: Walton County Fire 154.3400 MHz, narrow FM, 173.8 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oconee Areawide Radio System (OARS): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Walton County, start with the Walton County Site site of Oconee Areawide Radio System (OARS). Its control channels: 854.4125, 856.5625, 857.1125 MHz.
  • 10 listed entries are marked encrypted. No scanner can decode encrypted audio.
  • 2 entries are marked expired, so they may no longer be in use.

Data updated .

Walton County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Walton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walton County FireWalton County Fire – Dispatch (Simulcast from TRS)154.3400173.8 PLFMNWNKR640

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Walton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walton County Fire Expired: Expired 7/01Walnut Grove Fire – Talk-Around (Special Events)154.2500CSQFMNKUX371

EMS Talk-around

EMS Talk-around frequencies for Walton County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walton County EMS Expired: Expired 1/11Walton County EMS – Talk-Around155.1750173.8 PLFMNKSL409

Walton County trunked talkgroups

Oconee Areawide Radio System (OARS)

10 encrypted talkgroups (cannot be monitored)
Oconee Areawide Radio System (OARS) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Walton County FireFire/911 – Dispatch351098925D Encrypted
Walton County FireWalton County Fire – Tactical Channel35102891eD Encrypted
Walton County FireWalton County Fire – Tactical Channel35103891fD Encrypted
Walton County FireWalton County Fire – Tactical Channel351048920D Encrypted
Walton County FireWalton County Fire – Tactical Channel351058921D Encrypted
Walton County FireWalton County Fire – Tactical Channel351228932D Encrypted
Walton County FireWalton County Fire – Tactical Channel351238933D Encrypted
Walton County FireWalton County Fire – Tactical Channel351248934D Encrypted
Walton County FireWalton County Fire – Tactical Channel351258935D Encrypted
Walton County Fire UnconfirmedWalton County Fire – Hospital Channel (Walton Regional Medical Center) Patient Reports351118927D Encrypted

Radio system sites in Walton County

Program the control channel first; your scanner finds the voice channels from it.

Walton County Site · Oconee Areawide Radio System (OARS)
RFSS 7 · Site 1 (hex 1) · NAC 290
Control 854.4125, 856.5625, 857.1125, 857.5875
Voice 851.2625, 851.6625, 851.875, 852.675, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Walton County

Common questions

What frequency does the fire department use in Walton County?

Fire dispatch channels listed for Walton County: Walton County Fire 154.3400 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Walton County?

Yes. Fire and EMS talkgroups are listed for Oconee Areawide Radio System (OARS): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Walton County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Walton County?

For Walton County, start with the Walton County Site site of Oconee Areawide Radio System (OARS). Its control channels are 854.4125, 856.5625, 857.1125, 857.5875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Walton County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Walton County are marked encrypted.

Are Walton County fire and EMS talkgroups encrypted?

10 of the 10 talkgroups listed for Walton County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.