Skip to content

Spalding County Fire and EMS Frequencies

Spalding County in Georgia has 2 countywide conventional frequencies and 11 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Spalding County Fire and EMS Frequencies

Quick answer: Fire dispatch for Spalding County: Spalding County Fire 154.3850 MHz, narrow FM, 162.2 PL. EMS dispatch for Spalding County: Spalding County EMS 155.3250 MHz, narrow FM, 162.2 PL. Trunked: Spalding County P25 (Project 25), for example Spalding County Fire/EMS talkgroup 101 (hex 65).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Spalding County P25 (Project 25): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Spalding County, start with the Simulcast site of Spalding County P25. Its control channels: 851.225, 851.325, 851.6 MHz.

Data updated .

Spalding County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Spalding County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Spalding County FireSpalding County Fire – Dispatch154.3850
In 153.9500
162.2 PLFMNWZU334

EMS Dispatch

EMS Dispatch frequencies for Spalding County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Spalding County EMSTenet Spalding Regional EMS – Dispatch155.3250
In 150.8050
162.2 PLFMNWPKV861

Spalding County trunked talkgroups

Spalding County P25

Project 25

Spalding County P25 talkgroups
AgencyDescriptionTalkgroupHexMode
Spalding County Fire/EMSSpalding County Fire/EMS – Dispatch10165D
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel10266D
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel10367D
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel10468D
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel10569D
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel1066aD
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel1076bD
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel1086cD
Spalding County Fire/EMSSpalding County Fire/EMS – Dispatch7212d1D
Spalding County Fire/EMSSpalding County Fire/EMS – Tactical Channel7252d5D
Spalding County Fire/EMSEMS to Spalding Regional Hospital ER1908774D

Radio system sites in Spalding County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · Spalding County P25
Project 25 · RFSS 10 · Site 10 (hex A) · NAC 00A
Control 851.225, 851.325, 851.6, 852.1, 852.2, 852.35, 852.8125, 853.6375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Spalding County

Common questions

What frequency does the fire department use in Spalding County?

Fire dispatch channels listed for Spalding County: Spalding County Fire 154.3850 MHz, narrow FM, 162.2 PL.

What frequency does EMS or the ambulance service use in Spalding County?

EMS dispatch channels listed for Spalding County: Spalding County EMS 155.3250 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Spalding County?

Yes. Fire and EMS talkgroups are listed for Spalding County P25 (Project 25): 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Spalding County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Spalding County?

For Spalding County, start with the Simulcast site of Spalding County P25. Its control channels are 851.225, 851.325, 851.6, 852.1 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Spalding County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Spalding County are marked encrypted.

Are Spalding County fire and EMS talkgroups encrypted?

None of the 11 talkgroups listed for Spalding County are marked encrypted.