Skip to content

Blackshear Fire and EMS Frequencies

Blackshear in Pierce County, Georgia has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Simulcast (Camden County Public Safety (GA)), about 46 miles away.

About Blackshear Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Blackshear: Pierce County EMS 155.2950 MHz, narrow FM, 162.2 PL.

  • 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Blackshear conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Blackshear
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blackshear FireDPW/Fire/Police – Common155.8950FMNWNNQ551

Pierce County channels that also cover Blackshear

EMS Dispatch

EMS Dispatch frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County EMSPierce County EMS – Dispatch155.2950
In 151.3025
162.2 PLFMNWPBQ458

EMS Tactical

EMS Tactical frequencies for Pierce County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Pierce County EMSPierce County EMS – Tactical Channel150.7750FMNWPBQ458
Pierce County EMSPierce County EMS – Vehicle Extenders453.0625FMNWPBQ458
Pierce County EMSPierce County EMS – Vehicle Extenders453.3375FMNWPBQ458
Pierce County EMSPierce County EMS – Vehicle Extenders453.5250FMNWPBQ458
Pierce County EMSPierce County EMS – Vehicle Extenders453.5375FMNWPBQ458
Pierce County EMSPierce County EMS – Vehicle Extenders453.6000FMNWPBQ458
Pierce County EMSPierce County EMS – Vehicle Extenders458.0625FMNWPBQ458

Nearest trunked radio sites

Distances are measured from the center of Blackshear.

Simulcast · Camden County Public Safety (GA)
RFSS 1 · Site 1 (hex 1) · NAC 7EB · about 46 mi away
Control 854.7625, 855.3625, 856.0375, 856.7875
Glynn Co Simulcast · Southeast Georgia Regional Radio Network (SEGARRN)
RFSS 1 · Site 4 (hex 4) · NAC 2C1 · about 46 mi away
Control 772.30625, 772.55625, 856.0125, 857.4375
Voice 771.68125, 771.93125, 854.0625, 854.3875, 854.6125, 855.2375, 855.7375, 856.4375
Glennville · Tattnall County Public Safety (NXDN)
Site 3 (hex 3) · about 49 mi away
Control 151.4375
Voice 150.995, 151.0175, 151.4225, 154.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Blackshear?

We do not have a EMS dispatch channel listed specifically for Blackshear. The county-level EMS dispatch channels in the same county: Pierce County EMS 155.2950 MHz, narrow FM, 162.2 PL.

What scanner do I need to listen to fire and EMS in Blackshear?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Blackshear?

For Blackshear, start with the Simulcast site of Camden County Public Safety (GA). Its control channels are 854.7625, 855.3625, 856.0375, 856.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Blackshear fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Blackshear are marked encrypted.