About Jasper Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jasper: Pickens County Fire 155.1450 MHz, narrow FM, 131.8 PL. Trunked: Cobb Regional Radio System, for example Pickens Co. - Jasper talkgroup 33800 (hex 8408).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Cobb Regional Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Jasper, start with the Cherokee County Simulcast site of Cobb Regional Radio System, about 16 miles away. Its control channels: 852.35, 853.15, 853.475 MHz.
Data updated .
Jasper trunked talkgroups
Cobb Regional Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pickens Co. - Jasper | Jasper Fire – Dispatch | 33800 | 8408 | D |
Pickens County channels that also cover Jasper
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pickens County Fire | Pickens County Fire – Dispatch Patched to Cobb P25 TG33800 | 155.1450 In 150.8050 | 131.8 PL | FMN | WPPX410 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pickens County Fire | Pickens County Fire – Tactical Channel | 154.0700 | CSQ | FMN | KNBG245 |
| Pickens County Fire | Pickens County Fire – Tactical Channel | 154.2950 | 131.8 PL | FMN | WPPX410 |
| Pickens County Fire | Pickens County Fire – Tactical Channel | 154.3550 | CSQ | FMN | WPPX410 |
| Pickens County Fire | Pickens County Fire – Tactical Channel | 155.2200 | 131.8 PL | FMN | WPPX410 |
Nearest trunked radio sites
Distances are measured from the center of Jasper.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jasper?
We do not have a fire dispatch channel listed specifically for Jasper. The county-level fire dispatch channels in the same county: Pickens County Fire 155.1450 MHz, narrow FM, 131.8 PL.
Do fire departments and EMS use a trunked radio system in Jasper?
Yes. Fire and EMS talkgroups are listed for Cobb Regional Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Jasper?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Jasper?
For Jasper, start with the Cherokee County Simulcast site of Cobb Regional Radio System. Its control channels are 852.35, 853.15, 853.475, 855.8625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Jasper fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Jasper are marked encrypted.