Skip to content

Muscogee County Fire and EMS Frequencies

Muscogee County in Georgia has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Muscogee County Fire and EMS Frequencies

Quick answer: Trunked: Muscogee County Government (GA), for example Columbus Regional Airport talkgroup 225 (hex e1).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Muscogee County Government (GA): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Muscogee County, start with the Columbus site of Muscogee County Government (GA). Its control channels: 851.6125, 852.0875, 852.1125 MHz.

Data updated .

Muscogee County conventional frequencies

Hospitals & Medical

Hospitals & Medical frequencies for Muscogee County
AgencyDescriptionFrequency (MHz)ToneModeFCC
HospitalsPiedmont Columbus Regional – Patient Reports (HEAR)155.3400131.8 PLFMNWQOL214

Muscogee County trunked talkgroups

Muscogee County Government (GA)

Muscogee County Government (GA) talkgroups
AgencyDescriptionTalkgroupHexMode
Columbus Regional AirportColumbus Regional Airport – Operations225e1T

Radio system sites in Muscogee County

Program the control channel first; your scanner finds the voice channels from it.

Columbus · Muscogee County Government (GA)
RFSS 7 · Site 3 (hex 3) · NAC 393
Control 851.6125, 852.0875, 852.1125, 852.375
Voice 852.8375, 853.1375, 853.1625, 853.825, 854.0875, 854.4375, 854.7375, 854.9875, 855.3875, 855.5125, 855.7125, 855.9875, 856.3125, 856.4375, 856.7125, 856.8875, 856.9875, 857.3375, 857.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Muscogee County

Common questions

Do fire departments and EMS use a trunked radio system in Muscogee County?

Yes. Fire and EMS talkgroups are listed for Muscogee County Government (GA): 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Muscogee County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Muscogee County?

For Muscogee County, start with the Columbus site of Muscogee County Government (GA). Its control channels are 851.6125, 852.0875, 852.1125, 852.375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Muscogee County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Muscogee County are marked encrypted.

Are Muscogee County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Muscogee County are marked encrypted.