Skip to content

McIntosh County Fire and EMS Frequencies

McIntosh County in Georgia has 2 countywide conventional frequencies and 14 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About McIntosh County Fire and EMS Frequencies

Quick answer: Fire dispatch for McIntosh County: McIntosh County Fire 154.4150 MHz, narrow FM, 141.3 PL. Trunked: Southeast Georgia Regional Radio Network (SEGARRN), for example Chatham Emergency Services talkgroup 239 (hex ef).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Southeast Georgia Regional Radio Network (SEGARRN): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McIntosh County, start with the Eulonia site of Southeast Georgia Regional Radio Network (SEGARRN). Its control channels: 855.4875 MHz.

Data updated .

McIntosh County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for McIntosh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McIntosh County FireMcIntosh County Fire – Dispatch154.4150141.3 PLFMNWZV495

EMS Tactical

EMS Tactical frequencies for McIntosh County
AgencyDescriptionFrequency (MHz)ToneModeFCC
McIntosh County EMSMcIntosh County EMS – Alternate154.9950
In 159.0150
162.2 PLFMNWQHG689

McIntosh County trunked talkgroups

Southeast Georgia Regional Radio Network (SEGARRN)

Southeast Georgia Regional Radio Network (SEGARRN) talkgroups
AgencyDescriptionTalkgroupHexMode
Chatham Emergency ServicesChatham Emergency Services – Dispatch239efD
Georgia ANG/Savannah IAP FireNational Guard Fire – Dispatch41519fD
McIntosh County FireMcIntosh County Fire – Dispatch141023716D
Georgia ANG/Savannah IAP FireNational Guard Fire – Tactical4171a1D
Chatham Emergency ServicesAdministration793319D
Chatham Emergency ServicesChatham Emergency Services – Dispatch257101D
Medical HelicoptersAir Evac Medical Helicopter3073c01D
Medical HelicoptersOmniFlight Medical Helicopter12826321aD
Chatham Emergency ServicesChatham Emergency Services – Tactical Channel259103D
Chatham Emergency ServicesChatham Emergency Services – Tactical Channel261105D
Chatham Emergency ServicesChatham Emergency Services – Tactical Channel263107D
HospitalsMemorial Hospital215d7D
HospitalsSt. Josephs Emergency Room219dbD
HospitalsLiberty Regional Medical Center128343222D

Radio system sites in McIntosh County

Program the control channel first; your scanner finds the voice channels from it.

Eulonia · Southeast Georgia Regional Radio Network (SEGARRN)
RFSS 1 · Site 3 (hex 3) · NAC 2C0
Control 855.4875
Voice 854.7875, 855.0125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in McIntosh County

Common questions

What frequency does the fire department use in McIntosh County?

Fire dispatch channels listed for McIntosh County: McIntosh County Fire 154.4150 MHz, narrow FM, 141.3 PL.

Do fire departments and EMS use a trunked radio system in McIntosh County?

Yes. Fire and EMS talkgroups are listed for Southeast Georgia Regional Radio Network (SEGARRN): 14 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McIntosh County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in McIntosh County?

For McIntosh County, start with the Eulonia site of Southeast Georgia Regional Radio Network (SEGARRN). Its control channels are 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McIntosh County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for McIntosh County are marked encrypted.

Are McIntosh County fire and EMS talkgroups encrypted?

None of the 14 talkgroups listed for McIntosh County are marked encrypted.