About Ideal Fire and EMS Frequencies
Quick answer: Trunked: Central Georgia Interoperable Regional Radio System (CGIRRS), for example Bibb County Fire/EMS talkgroup 132 (hex 84).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Central Georgia Interoperable Regional Radio System (CGIRRS): 13 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ideal, start with the Americus site of Sumter County Public Safety, about 21 miles away. Its control channels: 151.355 MHz.
Data updated .
Macon County channels that also cover Ideal
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Macon County Fire | Fire & EMS | 155.4000 In 150.7750 | 85.4 PL | FMN | WPMW297 |
Central Georgia Interoperable Regional Radio System (CGIRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bibb County Fire/EMS | Bibb County Fire/EMS – Dispatch | 132 | 84 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Dispatch | 133 | 85 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Scene | 134 | 86 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Scene | 135 | 87 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Scene | 136 | 88 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Scene | 137 | 89 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Scene | 138 | 8a | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Events | 152 | 98 | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Prevention | 139 | 8b | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Utility | 140 | 8c | D |
| Bibb County Fire/EMS | Bibb County Fire/EMS – Training | 144 | 90 | D |
| Bibb County Fire/EMS Backup | Atrium Navicent EMS | 151 | 97 | D |
| Bibb County Fire/EMS | Atrium Navicent EMS – Events (? Backup) | 580 | 244 | D |
Nearest trunked radio sites
Distances are measured from the center of Ideal.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Ideal?
Yes. The county-level systems that cover Ideal are Fire and EMS talkgroups are listed for Central Georgia Interoperable Regional Radio System (CGIRRS): 13 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ideal?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ideal?
For Ideal, start with the Americus site of Sumter County Public Safety. Its control channels are 151.355 MHz. Program a control channel first; the scanner finds the voice channels from it.