Skip to content

Milner Fire and EMS Frequencies

We do not have frequencies listed specifically for Milner in Lamar County, Georgia yet. Countywide channels for Lamar County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Spalding County P25), about 10 miles away.

About Milner Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Milner: Lamar County Fire 453.9000 MHz, DMR, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Lamar County channels that also cover Milner

Fire Dispatch

Fire Dispatch frequencies for Lamar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lamar County FireFire/EMS Dispatch453.9000
In 458.9000
DMRKNIP814
Lamar County FireFire/EMS Dispatch453.9000
In 458.9000
131.8 PLFMNKNIP814

EMS Tactical

EMS Tactical frequencies for Lamar County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lamar County EMSEMS Expired 10/03/2012155.3850FMWPWB413

Nearest trunked radio sites

Distances are measured from the center of Milner.

Simulcast · Spalding County P25
Project 25 · RFSS 10 · Site 10 (hex A) · NAC 00A · about 10 mi away
Control 851.225, 851.325, 851.6, 852.1, 852.2, 852.35, 852.8125, 853.6375
Concord · Pike County Public Safety
Site 1 (hex 1) · about 12 mi away
Voice 460.1625
Zebulon · Pike County Public Safety
Site 3 (hex 3) · about 12 mi away
Voice 460.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Milner?

We do not have a fire dispatch channel listed specifically for Milner. The county-level fire dispatch channels in the same county: Lamar County Fire 453.9000 MHz, DMR, no tone.

What scanner do I need to listen to fire and EMS in Milner?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Milner?

For Milner, start with the Simulcast site of Spalding County P25. Its control channels are 851.225, 851.325, 851.6, 852.1 MHz. Program a control channel first; the scanner finds the voice channels from it.