About Kite Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kite: Johnson County Fire 154.3550 MHz, DMR, no tone. County-level ems dispatch that covers Kite: Johnson County EMS 159.8900 MHz, DMR, no tone.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Johnson County channels that also cover Kite
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnson County Fire | Johnson County Fire – Dispatch | 154.3550 In 153.8900 | DMR | WPGV657 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Johnson County EMS | Johnson County EMS – Dispatch | 159.8900 | DMR | WPGV657 |
Nearest trunked radio sites
Distances are measured from the center of Kite.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kite?
We do not have a fire dispatch channel listed specifically for Kite. The county-level fire dispatch channels in the same county: Johnson County Fire 154.3550 MHz, DMR, no tone.
What frequency does EMS or the ambulance service use in Kite?
We do not have a EMS dispatch channel listed specifically for Kite. The county-level EMS dispatch channels in the same county: Johnson County EMS 159.8900 MHz, DMR, no tone.
What scanner do I need to listen to fire and EMS in Kite?
A scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Kite?
For Kite, start with the Wadley site of Jefferson County Public Safety. Its control channels are 154.4225, 155.7525 MHz. Program a control channel first; the scanner finds the voice channels from it.