Skip to content

Millen Fire and EMS Frequencies

Millen in Jenkins County, Georgia has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Emanuel Co Simulcast (Southeast Georgia Regional Radio Network (SEGARRN)), about 26 miles away.

About Millen Fire and EMS Frequencies

Quick answer: Fire dispatch for Millen: Millen Fire 154.1900 MHz, narrow FM, no tone. County-level ems dispatch that covers Millen: Jenkins County EMS 460.1000 MHz, DMR, CC 11 · TG 20014 · SL 1.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Millen conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Millen
AgencyDescriptionFrequency (MHz)ToneModeFCC
Millen FireMillen Fire – Dispatch154.1900
In 158.8800
FMNWPMX310

Jenkins County channels that also cover Millen

Fire Dispatch

Fire Dispatch frequencies for Jenkins County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jenkins County FireJenkins County Fire – Dispatch453.9750
In 458.9750
CC 11 · TG 20012 · SL 1DMRWQPM524

EMS Dispatch

EMS Dispatch frequencies for Jenkins County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Jenkins County EMSJenkins County EMS – Dispatch460.1000
In 465.1000
CC 11 · TG 20014 · SL 1DMRWQPM524

Nearest trunked radio sites

Distances are measured from the center of Millen.

Emanuel Co Simulcast · Southeast Georgia Regional Radio Network (SEGARRN)
RFSS 1 · Site 10 (hex A) · NAC 2CA · about 26 mi away
Control 856.1625, 857.2625
Voice 856.5125, 856.7875
Wadley · Jefferson County Public Safety
Site 2 (hex 2) · about 27 mi away
Control 154.4225, 155.7525
Bulloch Co Simulcast · Southeast Georgia Regional Radio Network (SEGARRN)
RFSS 1 · Site 9 (hex 9) · NAC 2C9 · about 28 mi away
Control 856.4875, 856.7375, 856.8125, 856.9375
Voice 856.1375, 856.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Millen?

Fire dispatch channels listed for Millen: Millen Fire 154.1900 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Millen?

We do not have a EMS dispatch channel listed specifically for Millen. The county-level EMS dispatch channels in the same county: Jenkins County EMS 460.1000 MHz, DMR, CC 11 · TG 20014 · SL 1.

What scanner do I need to listen to fire and EMS in Millen?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Millen?

For Millen, start with the Emanuel Co Simulcast site of Southeast Georgia Regional Radio Network (SEGARRN). Its control channels are 856.1625, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Millen fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Millen are marked encrypted.