About Hall County Fire and EMS Frequencies
Quick answer: Fire dispatch for Hall County: Hall County Fire 154.3400 MHz, narrow FM, 118.8 PL.
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Cobb Regional Radio System: 2 talkgroups; Hall County Regional Radio System: 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hall County, start with the Gillsville site of Banks County Government (GA). Its control channels: 453.26875 MHz.
- 12 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Hall County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hall County Fire | Hall County Fire – Dispatch (+Gainesville) | 154.3400 In 153.7700 | 118.8 PL | FMN | KNED391 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hall County Fire | Hall County Fire – Tactical Channel (Fire Simulcast) | 156.0600 | 69.3 PL | FMN | WNKU363 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hall County Hospital | EMS-to-Lanier Park Hospital | 155.2200 | 151.4 PL | FMN | WPMK920 |
| Northeast Georgia Medical Center | Patient Reports-Gainesville | 463.0000 In 468.0000 | 127.3 PL | FMN | KVP702 |
| Northeast Georgia Medical Center | Patient Reports-Braselton | 463.0250 In 468.0250 | 127.3 PL | FMN | KVP702 |
| Northeast Georgia Medical Center | Patient Reports-Gainesville | 463.1250 In 468.1250 | CSQ | FMN | KVP702 |
Hall County trunked talkgroups
Cobb Regional Radio System
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hall Co. - Backup Backup | Hall Co. – Backup – Dispatch | 35083 | 890b | T Encrypted |
| Hall Co. - Backup Backup | Hall Co. – Backup – Tactical Channel | 35084 | 890c | T Encrypted |
Hall County Regional Radio System
10 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Hall County Fire/EMS | Primary (Dispatch) | 5031 | 13a7 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5042 | 13b2 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5043 | 13b3 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5044 | 13b4 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5045 | 13b5 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5046 | 13b6 | D Encrypted |
| Hall County Fire/EMS | Fire Training | 5047 | 13b7 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5032 | 13a8 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5033 | 13a9 | D Encrypted |
| Hall County Fire/EMS | Hall County Fire/EMS – Tactical Channel | 5034 | 13aa | D Encrypted |
Radio system sites in Hall County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Hall County
Common questions
What frequency does the fire department use in Hall County?
Fire dispatch channels listed for Hall County: Hall County Fire 154.3400 MHz, narrow FM, 118.8 PL.
Do fire departments and EMS use a trunked radio system in Hall County?
Yes. Fire and EMS talkgroups are listed for Cobb Regional Radio System: 2 talkgroups; Hall County Regional Radio System: 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hall County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hall County?
For Hall County, start with the Gillsville site of Banks County Government (GA). Its control channels are 453.26875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hall County fire and EMS frequencies encrypted?
None of the 6 conventional frequencies listed for Hall County are marked encrypted.
Are Hall County fire and EMS talkgroups encrypted?
12 of the 12 talkgroups listed for Hall County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.