Skip to content

Jakin Fire and EMS Frequencies

We do not have frequencies listed specifically for Jakin in Early County, Georgia yet. Countywide channels for Early County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Donalsonville (Metrolink NXDN), about 7 miles away.

About Jakin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Jakin: Blakley Fire 156.1350 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Jakin: Early County EMS 155.8725 MHz, narrow FM, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Early County channels that also cover Jakin

Fire Dispatch

Fire Dispatch frequencies for Early County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blakley FireBlakley Fire – Dispatch156.1350
In 154.4000
146.2 PLFMNWPVS223

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Early County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Blakley Fire Expired: Expired 2/17Blakley Fire – Tactical Channel156.1725
In 153.7775
FMNWQGK991

EMS Dispatch

EMS Dispatch frequencies for Early County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Early County EMSPioneer EMS155.8725
In 154.0850
FMNWQTJ953

EMS Tactical

EMS Tactical frequencies for Early County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Early County EMSEarly County EMS – Tactical Channel155.1600FMNKGP655

Nearest trunked radio sites

Distances are measured from the center of Jakin.

Donalsonville · Metrolink NXDN
Site 2 (hex 2) · about 7 mi away
Control 461.8875
Voice 452.1625, 461.5625, 463.6875
Arlington (*) · Calhoun County Public Safety (GA)
Site 2 (hex 2) · about 28 mi away
Voice 155.6325, 155.7825
Decatur/Grady Co. Simulcast · Southwest Georgia Regional Radio System
RFSS 6 · Site 4 (hex 4) · NAC 8D4 · about 36 mi away
Control 769.33125, 770.50625
Voice 770.78125, 771.25625, 771.75625, 772.50625, 774.15625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Jakin?

We do not have a fire dispatch channel listed specifically for Jakin. The county-level fire dispatch channels in the same county: Blakley Fire 156.1350 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Jakin?

We do not have a EMS dispatch channel listed specifically for Jakin. The county-level EMS dispatch channels in the same county: Early County EMS 155.8725 MHz, narrow FM, no tone.

What scanner do I need to listen to fire and EMS in Jakin?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Jakin?

For Jakin, start with the Donalsonville site of Metrolink NXDN. Its control channels are 461.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.