About Lilly Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lilly: Dooly County Fire 154.3250 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Lilly: Dooly County EMS 155.1000 MHz, NXDN48, RAN 1.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Dooly County channels that also cover Lilly
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dooly County Fire | Dooly County Fire – Paging | 154.3250 | 127.3 PL | FMN | KNIM345 |
| Dooly County Fire | Dooly County Fire – Dispatch | 159.3375 In 151.4375 | RAN 7 | NXDN48 | WPMQ961 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dooly County Fire | Dooly County Fire – Operations | 153.9200 | 127.3 PL | FMN | WPMQ961 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Dooly County EMS | Dooly County EMS – Dispatch | 155.1000 In 159.0450 | RAN 1 | NXDN48 | WPUV856 |
Nearest trunked radio sites
Distances are measured from the center of Lilly.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lilly?
We do not have a fire dispatch channel listed specifically for Lilly. The county-level fire dispatch channels in the same county: Dooly County Fire 154.3250 MHz, narrow FM, 127.3 PL.
What frequency does EMS or the ambulance service use in Lilly?
We do not have a EMS dispatch channel listed specifically for Lilly. The county-level EMS dispatch channels in the same county: Dooly County EMS 155.1000 MHz, NXDN48, RAN 1.
What scanner do I need to listen to fire and EMS in Lilly?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Lilly?
For Lilly, start with the Leslie site of Sumter County Public Safety. Its control channels are 151.4825 MHz. Program a control channel first; the scanner finds the voice channels from it.