Skip to content

Crisp County Fire and EMS Frequencies

Crisp County in Georgia has 3 countywide conventional frequencies and 4 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Crisp County Fire and EMS Frequencies

Quick answer: Fire dispatch for Crisp County: Crisp County Fire 154.2200 MHz, narrow FM, 103.5 PL. EMS dispatch for Crisp County: Crisp County EMS 158.7750 MHz, narrow FM, 103.5 PL; Medical Helicopter 159.6450 MHz, narrow FM, 226 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Crisp County Public Safety (P25) (Project 25): 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crisp County, start with the Cordele site of Crisp County Public Safety (P25). Its control channels: 856.7875, 857.3375 MHz.
  • 4 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Crisp County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crisp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crisp County FireCrisp County Fire – Paging154.2200
In 153.7700
103.5 PLFMNWQSH794

EMS Dispatch

EMS Dispatch frequencies for Crisp County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crisp County EMSCrisp County EMS – Paging158.7750
In 153.9650
103.5 PLFMNWPBR247
Medical HelicopterAir Evac Lifeteam 86-Americus (Cordele Tower)159.6450226 DPLFMNWQLE332

Crisp County trunked talkgroups

Crisp County Public Safety (P25)

Project 25

4 encrypted talkgroups (cannot be monitored)
Crisp County Public Safety (P25) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Crisp County FireCounty Fire/Rescue – Dispatch550226D Encrypted
Crisp County EMSCrisp County EMS – Dispatch401191D Encrypted
Crisp County EMSCrisp County EMS – Tactical Channel403193D Encrypted
Crisp County HospitalPatient Reports41419eD Encrypted

Radio system sites in Crisp County

Program the control channel first; your scanner finds the voice channels from it.

Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Crisp County

Common questions

What frequency does the fire department use in Crisp County?

Fire dispatch channels listed for Crisp County: Crisp County Fire 154.2200 MHz, narrow FM, 103.5 PL.

What frequency does EMS or the ambulance service use in Crisp County?

EMS dispatch channels listed for Crisp County: Crisp County EMS 158.7750 MHz, narrow FM, 103.5 PL; Medical Helicopter 159.6450 MHz, narrow FM, 226 DPL.

Do fire departments and EMS use a trunked radio system in Crisp County?

Yes. Fire and EMS talkgroups are listed for Crisp County Public Safety (P25) (Project 25): 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crisp County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crisp County?

For Crisp County, start with the Cordele site of Crisp County Public Safety (P25). Its control channels are 856.7875, 857.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crisp County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Crisp County are marked encrypted.

Are Crisp County fire and EMS talkgroups encrypted?

4 of the 4 talkgroups listed for Crisp County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.