Skip to content

Lenox Fire and EMS Frequencies

We do not have frequencies listed specifically for Lenox in Cook County, Georgia yet. Countywide channels for Cook County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tifton (Tift County Public Safety P25), about 13 miles away.

About Lenox Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lenox: Cook County Fire 155.5650 MHz, narrow FM, 127.3 PL. County-level ems dispatch that covers Lenox: Cook County EMS 154.0625 MHz, narrow FM, 210.7 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Cook County channels that also cover Lenox

Fire Dispatch

Fire Dispatch frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County FireCook County Fire – Dispatch155.5650
In 153.7550
127.3 PLFMNWPZX536

EMS Dispatch

EMS Dispatch frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County EMSCook EMS – Dispatch154.0625
In 159.0675
210.7 PLFMNKUY598

EMS Tactical

EMS Tactical frequencies for Cook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Cook County EMS UnconfirmedGrady EMS – Tactical155.2950FMNKUY598

Nearest trunked radio sites

Distances are measured from the center of Lenox.

Tifton · Tift County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 671 · about 13 mi away
Control 856.9625, 857.4875
Voice 854.1875, 854.5125, 854.7875, 855.2375, 855.5875, 855.9375, 856.2625, 856.6125
Simulcast · Lowndes County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 6F1 · about 32 mi away
Control 854.8125, 856.4375, 856.7375, 856.9375
Voice 854.4125, 855.0625, 855.1875, 855.6875, 856.4125, 857.4375, 859.8375
Thomas Co. Simulcast · Southwest Georgia Regional Radio System
RFSS 6 · Site 2 (hex 2) · NAC 8D1 · about 38 mi away
Control 856.3875, 856.9875
Voice 854.5375, 854.9875, 855.2125, 855.4375, 855.9875, 857.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lenox?

We do not have a fire dispatch channel listed specifically for Lenox. The county-level fire dispatch channels in the same county: Cook County Fire 155.5650 MHz, narrow FM, 127.3 PL.

What frequency does EMS or the ambulance service use in Lenox?

We do not have a EMS dispatch channel listed specifically for Lenox. The county-level EMS dispatch channels in the same county: Cook County EMS 154.0625 MHz, narrow FM, 210.7 PL.

What scanner do I need to listen to fire and EMS in Lenox?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lenox?

For Lenox, start with the Tifton site of Tift County Public Safety P25. Its control channels are 856.9625, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.