Skip to content

Fargo Fire and EMS Frequencies

We do not have frequencies listed specifically for Fargo in Clinch County, Georgia yet. Countywide channels for Clinch County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Lowndes County Public Safety P25), about 42 miles away.

About Fargo Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Fargo: Clinch County Fire 154.7250 MHz, narrow FM, 151.4 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Clinch County channels that also cover Fargo

Fire Dispatch

Fire Dispatch frequencies for Clinch County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinch County FireClinch County Fire – Dispatch154.7250
In 159.0675
151.4 PLFMNWQMY832

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Clinch County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Clinch County FireClinch County Fire – Tactical Channel154.4300FMNWYK529

Nearest trunked radio sites

Distances are measured from the center of Fargo.

Simulcast · Lowndes County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 6F1 · about 42 mi away
Control 854.8125, 856.4375, 856.7375, 856.9375
Voice 854.4125, 855.0625, 855.1875, 855.6875, 856.4125, 857.4375, 859.8375
Simulcast · Camden County Public Safety (GA)
RFSS 1 · Site 1 (hex 1) · NAC 7EB · about 60 mi away
Control 854.7625, 855.3625, 856.0375, 856.7875
Glynn Co Simulcast · Southeast Georgia Regional Radio Network (SEGARRN)
RFSS 1 · Site 4 (hex 4) · NAC 2C1 · about 73 mi away
Control 772.30625, 772.55625, 856.0125, 857.4375
Voice 771.68125, 771.93125, 854.0625, 854.3875, 854.6125, 855.2375, 855.7375, 856.4375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Fargo?

We do not have a fire dispatch channel listed specifically for Fargo. The county-level fire dispatch channels in the same county: Clinch County Fire 154.7250 MHz, narrow FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Fargo?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Fargo?

For Fargo, start with the Simulcast site of Lowndes County Public Safety P25. Its control channels are 854.8125, 856.4375, 856.7375, 856.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.