Skip to content

Camden County Fire and EMS Frequencies

Camden County in Georgia has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Camden County Fire and EMS Frequencies

Quick answer: Fire dispatch for Camden County: Camden County Fire 154.8225 MHz, narrow FM, 364 DPL. Trunked: Camden County Public Safety (GA), for example Camden County Fire talkgroup 3001 (hex bb9).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Camden County Public Safety (GA): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Camden County, start with the Simulcast site of Camden County Public Safety (GA). Its control channels: 854.7625, 855.3625, 856.0375 MHz.

Data updated .

Camden County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Camden County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Camden County FireCamden County Fire – Dispatch (Countywide) (Channel 1)154.8225
In 158.9625
364 DPLFMNKIL390

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Camden County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Camden County FireCamden County Fire – Tactical Channel (Channel 2)154.2425
In 156.0600
132 DPLFMNKIL390

Camden County trunked talkgroups

Camden County Public Safety (GA)

Camden County Public Safety (GA) talkgroups
AgencyDescriptionTalkgroupHexMode
Camden County FireCamden Fire3001bb9T
Camden County EMSCamden EMS20017d1T

Radio system sites in Camden County

Program the control channel first; your scanner finds the voice channels from it.

Simulcast · Camden County Public Safety (GA)
RFSS 1 · Site 1 (hex 1) · NAC 7EB
Control 854.7625, 855.3625, 856.0375, 856.7875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Camden County

Common questions

What frequency does the fire department use in Camden County?

Fire dispatch channels listed for Camden County: Camden County Fire 154.8225 MHz, narrow FM, 364 DPL.

Do fire departments and EMS use a trunked radio system in Camden County?

Yes. Fire and EMS talkgroups are listed for Camden County Public Safety (GA): 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Camden County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Camden County?

For Camden County, start with the Simulcast site of Camden County Public Safety (GA). Its control channels are 854.7625, 855.3625, 856.0375, 856.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Camden County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Camden County are marked encrypted.

Are Camden County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Camden County are marked encrypted.