Skip to content

Winder Fire and EMS Frequencies

We do not have frequencies listed specifically for Winder in Barrow County, Georgia yet. Countywide channels for Barrow County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Gwinnett County Public Safety (GA)), about 14 miles away.

About Winder Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Winder: Barrow County Fire 154.1600 MHz, narrow FM, 206.5 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Barrow County channels that also cover Winder

Fire Dispatch

Fire Dispatch frequencies for Barrow County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Barrow County FireBarrow County Fire – Dispatch (Simulcast from TRS)154.1600206.5 PLFMNWNFG787

Nearest trunked radio sites

Distances are measured from the center of Winder.

Simulcast · Gwinnett County Public Safety (GA)
RFSS 2 · Site 1 (hex 1) · NAC 270 · about 14 mi away
Control 854.8125, 854.8375, 855.4875, 855.7875
Voice 851.1375, 851.2125, 851.2375, 851.3875, 852.3375, 852.3875, 852.9625, 853.1125, 853.1375, 853.3875, 853.4875, 854.7875, 855.3125, 855.7625, 855.8125, 856.2875, 856.8125, 856.8375, 856.9125, 857.2875, 857.8125, 857.8375, 857.9125
Jackson County Simulcast · Hall County Regional Radio System
RFSS 1 · Site 2 (hex 2) · NAC 1D2 · about 14 mi away
Control 856.4, 856.675, 857.0375, 857.2
Voice 854.1125, 854.1875, 854.575, 856.1625, 856.2
Walton County Site · Oconee Areawide Radio System (OARS)
RFSS 7 · Site 1 (hex 1) · NAC 290 · about 15 mi away
Control 854.4125, 856.5625, 857.1125, 857.5875
Voice 851.2625, 851.6625, 851.875, 852.675, 853.6125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Winder?

We do not have a fire dispatch channel listed specifically for Winder. The county-level fire dispatch channels in the same county: Barrow County Fire 154.1600 MHz, narrow FM, 206.5 PL.

What scanner do I need to listen to fire and EMS in Winder?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Winder?

For Winder, start with the Simulcast site of Gwinnett County Public Safety (GA). Its control channels are 854.8125, 854.8375, 855.4875, 855.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.