Skip to content

Baldwin County Fire and EMS Frequencies

Baldwin County in Georgia has 3 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Baldwin County Fire and EMS Frequencies

Quick answer: Fire dispatch for Baldwin County: Baldwin County Fire 154.1750 MHz, narrow FM, no tone. Trunked: Baldwin County Public Safety (GA), for example Baldwin County Fire/EMS talkgroup 39100 (hex 98bc).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Baldwin County Public Safety (GA): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Baldwin County, start with the Milledgeville SImulcast site of Baldwin County Public Safety (GA). Its control channels: 769.85625, 770.60625, 771.50625 MHz.
  • 5 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Baldwin County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Baldwin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Baldwin County FireBaldwin County Fire – Paging Only / Station Alerts154.1750
In 159.0600
FMNKNAI721
Baldwin County FireBaldwin County Fire – Dispatch156.2025
In 159.4125
DMRKNAI721

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Baldwin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Baldwin County FireBaldwin County Fire – Fire Ground153.8600DMRWNVG530

Baldwin County trunked talkgroups

Baldwin County Public Safety (GA)

Baldwin County Public Safety (GA) talkgroups
AgencyDescriptionTalkgroupHexMode
Baldwin County Fire/EMSBaldwin County Fire/EMS – Dispatch3910098bcD
5 encrypted talkgroups (cannot be monitored)
Baldwin County Public Safety (GA) encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Baldwin County Fire/EMSBaldwin County Fire/EMS – Dispatch3910598c1D Encrypted
Baldwin County Fire/EMSBaldwin County Fire/EMS – Operations3910198bdD Encrypted
Baldwin County Fire/EMSBaldwin County Fire/EMS – Operations3910298beD Encrypted
Baldwin County Fire/EMSBaldwin County Fire/EMS – Administration3910398bfD Encrypted
Baldwin County Fire/EMSBaldwin County Fire/EMS – Dispatch (Atrium Baldwin)3912098d0D Encrypted

Radio system sites in Baldwin County

Program the control channel first; your scanner finds the voice channels from it.

Milledgeville SImulcast · Baldwin County Public Safety (GA)
RFSS 7 · Site 1 (hex 1)
Control 769.85625, 770.60625, 771.50625, 772.98125, 774.38125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Baldwin County

Common questions

What frequency does the fire department use in Baldwin County?

Fire dispatch channels listed for Baldwin County: Baldwin County Fire 154.1750 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Baldwin County?

Yes. Fire and EMS talkgroups are listed for Baldwin County Public Safety (GA): 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Baldwin County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Baldwin County?

For Baldwin County, start with the Milledgeville SImulcast site of Baldwin County Public Safety (GA). Its control channels are 769.85625, 770.60625, 771.50625, 772.98125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Baldwin County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Baldwin County are marked encrypted.

Are Baldwin County fire and EMS talkgroups encrypted?

5 of the 6 talkgroups listed for Baldwin County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.