Skip to content

Willacoochee Fire and EMS Frequencies

We do not have frequencies listed specifically for Willacoochee in Atkinson County, Georgia yet. Countywide channels for Atkinson County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Tifton (Tift County Public Safety P25), about 28 miles away.

About Willacoochee Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Willacoochee: Atkinson County Fire 150.9950 MHz, NXDN48, RAN 23.

  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Atkinson County channels that also cover Willacoochee

Fire Dispatch

Fire Dispatch frequencies for Atkinson County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Atkinson County FireFire/Rescue Dispatch150.9950
In 154.0700
RAN 23NXDN48WQBD228

Nearest trunked radio sites

Distances are measured from the center of Willacoochee.

Tifton · Tift County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 671 · about 28 mi away
Control 856.9625, 857.4875
Voice 854.1875, 854.5125, 854.7875, 855.2375, 855.5875, 855.9375, 856.2625, 856.6125
Simulcast · Lowndes County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 6F1 · about 37 mi away
Control 854.8125, 856.4375, 856.7375, 856.9375
Voice 854.4125, 855.0625, 855.1875, 855.6875, 856.4125, 857.4375, 859.8375
Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940 · about 59 mi away
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Willacoochee?

We do not have a fire dispatch channel listed specifically for Willacoochee. The county-level fire dispatch channels in the same county: Atkinson County Fire 150.9950 MHz, NXDN48, RAN 23.

What scanner do I need to listen to fire and EMS in Willacoochee?

A scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Willacoochee?

For Willacoochee, start with the Tifton site of Tift County Public Safety P25. Its control channels are 856.9625, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.