Skip to content

Yuma County Fire and EMS Frequencies

Yuma County in Colorado has 1 countywide conventional frequency and 5 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Yuma County Fire and EMS Frequencies

Quick answer: Fire dispatch for Yuma County: Yuma County Fire 154.4150 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Yuma County Fire talkgroup 9042 (hex 2352).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Yuma County, start with the Idalia site of State of Colorado DTRS. Its control channels: 852.075, 853.425, 853.7 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Yuma County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Yuma County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Yuma County FireYuma County Fire – Dispatch154.4150
In 153.7700
FMNWPSL533

Yuma County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Yuma County FireCounty Fire90422352D
Yuma County FireWages Volunteer Fire Department9054235eD
Yuma County EMSCounty EMS90432353D
Yuma County EMSSouth Yuma EMS92522424D
1 encrypted talkgroup (cannot be monitored)
State of Colorado DTRS encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
Yuma County EMSCounty EMS Secure9053235dD Encrypted

Radio system sites in Yuma County

Program the control channel first; your scanner finds the voice channels from it.

Idalia · State of Colorado DTRS
RFSS 3 · Site 31 (hex 1F) · NAC D1F
Control 852.075, 853.425, 853.7, 853.8875
Voice 851.9, 854.2375
Wray · State of Colorado DTRS
RFSS 3 · Site 44 (hex 2C) · NAC D1C
Control 852.7125, 853.175, 853.875
Voice 851.7375, 852.15, 859.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Yuma County

Common questions

What frequency does the fire department use in Yuma County?

Fire dispatch channels listed for Yuma County: Yuma County Fire 154.4150 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Yuma County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Yuma County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Yuma County?

For Yuma County, start with the Idalia site of State of Colorado DTRS. Its control channels are 852.075, 853.425, 853.7, 853.8875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Yuma County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Yuma County are marked encrypted.

Are Yuma County fire and EMS talkgroups encrypted?

1 of the 5 talkgroups listed for Yuma County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.