Skip to content

Washington County Fire and EMS Frequencies

Washington County in Colorado has 1 countywide conventional frequency and 6 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 154.3850 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Washington County Fire talkgroup 9048 (hex 2358).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Washington County, start with the Akron site of State of Colorado DTRS. Its control channels: 852.975, 853.25, 853.5 MHz.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireSouthwest Washington Fire Protection District154.3850FMNWPTZ309

Washington County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Washington County FireCounty Fire90482358D
Washington County FireSW Washington County Fire92502422D
Washington County FireCounty Fire Tactical90452355D
Washington County FireCounty Fire Tactical90462356D
Washington County FireCounty Fire Tactical90472357D
Washington County EMSCounty EMS90492359D

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Akron · State of Colorado DTRS
RFSS 3 · Site 17 (hex 11) · NAC D11
Control 852.975, 853.25, 853.5, 853.95
Voice 852.1375, 854.6875, 858.5625
Anton · State of Colorado DTRS
RFSS 3 · Site 19 (hex 13) · NAC D11
Control 851.95, 852.7, 853.475, 853.925
Voice 851.15
Yuma · State of Colorado DTRS
RFSS 3 · Site 34 (hex 22) · NAC D12
Control 851.825, 852.3875, 852.925, 853.525
Voice 851.3, 859.5125
Last Chance · State of Colorado DTRS
RFSS 3 · Site 39 (hex 27) · NAC D17
Control 851.675, 852.1125, 852.7625, 853.7375
Voice 851.075
Yuma Air (Aircraft Only) · State of Colorado DTRS
RFSS 3 · Site 58 (hex 3A) · NAC D1A
Control 774.33125, 774.58125, 774.83125
Voice 774.08125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 154.3850 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Washington County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Akron site of State of Colorado DTRS. Its control channels are 852.975, 853.25, 853.5, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Washington County are marked encrypted.

Are Washington County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Washington County are marked encrypted.