Skip to content

Summit County Fire and EMS Frequencies

Summit County in Colorado has 2 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 9 cities and communities below for local fire departments and EMS agencies.

About Summit County Fire and EMS Frequencies

Quick answer: Trunked: State of Colorado DTRS, for example Summit County Fire talkgroup 12476 (hex 30bc).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Summit County, start with the Copper Mountain site of State of Colorado DTRS. Its control channels: 851.7125, 851.9125, 852.6875 MHz.

Data updated .

Summit County conventional frequencies

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mountain Rescue Channel-1Mountain Rescue Channel155.1600CSQFMNKZJ918
Mountain Rescue Channel-2Mountain Rescue Channel155.2350CSQFMNWQG741

Summit County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Summit County FireSearch and Rescue1247630bcD

Radio system sites in Summit County

Program the control channel first; your scanner finds the voice channels from it.

Copper Mountain · State of Colorado DTRS
RFSS 2 · Site 7 (hex 7) · NAC D17
Control 851.7125, 851.9125, 852.6875, 852.9125
Voice 851.25, 856.0625, 857.6875, 858.0875
Lake Hill · State of Colorado DTRS
RFSS 2 · Site 57 (hex 39) · NAC D19
Control 852.9, 853.1125, 853.4, 853.9375
Voice 852.3125, 854.7125, 856.1625, 858.1625
Keystone Resort · State of Colorado DTRS
RFSS 2 · Site 58 (hex 3A) · NAC D1A
Control 769.68125, 769.93125, 770.18125, 770.43125
Voice 769.18125, 769.43125
Tyrolean · State of Colorado DTRS
RFSS 2 · Site 77 (hex 4D) · NAC D1D
Control 851.7, 851.875, 852.275, 852.825
Voice 851.3875, 858.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Summit County

Common questions

Do fire departments and EMS use a trunked radio system in Summit County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Summit County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Summit County?

For Summit County, start with the Copper Mountain site of State of Colorado DTRS. Its control channels are 851.7125, 851.9125, 852.6875, 852.9125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Summit County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Summit County are marked encrypted.

Are Summit County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Summit County are marked encrypted.