Skip to content

Sedgwick County Fire and EMS Frequencies

Sedgwick County in Colorado has 0 countywide conventional frequencies and 1 countywide talkgroup in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Sedgwick County Fire and EMS Frequencies

Quick answer: Trunked: State of Colorado DTRS, for example Sedgwick County Fire talkgroup 9206 (hex 23f6).

  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Sedgwick County, start with the Wildhorse site of State of Colorado DTRS. Its control channels: 851.6, 851.925, 852.5875 MHz.

Data updated .

Sedgwick County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Sedgwick County FireCounty Fire Dispatch920623f6D

Radio system sites in Sedgwick County

Program the control channel first; your scanner finds the voice channels from it.

Wildhorse · State of Colorado DTRS
RFSS 3 · Site 21 (hex 15) · NAC D15
Control 851.6, 851.925, 852.5875, 852.7375
Voice 851.35, 857.0875
Julesburg · State of Colorado DTRS
RFSS 3 · Site 35 (hex 23) · NAC D13
Control 852.9, 853.1125, 853.4, 853.9375
Voice 852.3125, 854.5125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Sedgwick County

Common questions

Do fire departments and EMS use a trunked radio system in Sedgwick County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Sedgwick County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Sedgwick County?

For Sedgwick County, start with the Wildhorse site of State of Colorado DTRS. Its control channels are 851.6, 851.925, 852.5875, 852.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Sedgwick County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Sedgwick County are marked encrypted.