Skip to content

Saguache County Fire and EMS Frequencies

Saguache County in Colorado has 3 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Saguache County Fire and EMS Frequencies

Quick answer: Fire dispatch for Saguache County: Saguache County Fire 154.1900 MHz, FM, 261 DPL. Trunked: State of Colorado DTRS, for example Saguache County Fire talkgroup 8332 (hex 208c).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Saguache County, start with the Saguache Peak site of State of Colorado DTRS. Its control channels: 851.925, 852.5875, 852.7375 MHz.

Data updated .

Saguache County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Saguache County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Saguache County FireNorthern Saguache County Fire Protection District – Dispatch/Operations154.1900261 DPLFMWQJG708
Saguache County FireBaca Grand Fire Protecton District154.4450
In 150.7750
110.9 PLFMWSU221
Saguache County FireNorthern Saguache County Fire Protection District – Dispatch/Operations155.7450FM—

Saguache County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Saguache County FireSaguache County Fire – Dispatch8332208cD
Saguache County FireSaguache County Fire – Tactical Channel8333208dD
Saguache County EMSSaguache County EMS – Dispatch81982006D

Radio system sites in Saguache County

Program the control channel first; your scanner finds the voice channels from it.

Saguache Peak · State of Colorado DTRS
RFSS 6 · Site 54 (hex 36) · NAC D16
Control 851.925, 852.5875, 852.7375, 853.8375
Voice 851.35, 851.6, 855.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Saguache County

Common questions

What frequency does the fire department use in Saguache County?

Fire dispatch channels listed for Saguache County: Saguache County Fire 154.1900 MHz, FM, 261 DPL.

Do fire departments and EMS use a trunked radio system in Saguache County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Saguache County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Saguache County?

For Saguache County, start with the Saguache Peak site of State of Colorado DTRS. Its control channels are 851.925, 852.5875, 852.7375, 853.8375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Saguache County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Saguache County are marked encrypted.

Are Saguache County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Saguache County are marked encrypted.