About Routt County Fire and EMS Frequencies
Quick answer: Fire dispatch for Routt County: Routt County Fire 154.3700 MHz, narrow FM, 127.3 PL. Trunked: State of Colorado DTRS, for example Routt County Fire talkgroup 11659 (hex 2d8b).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Routt County, start with the Buffalo Pass site of State of Colorado DTRS. Its control channels: 851.7625, 852.0625, 852.325 MHz.
Data updated .
Routt County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Routt County Fire | Routt County Fire-EMS (multiple site PL tones) | 154.3700 In 153.8300 | 127.3 PL | FMN | WPTN305 |
| Routt County Fire | Routt County Fire-EMS Tone-outs | 154.3700 In 153.8300 | 114.8 PL | FMN | WPTN305 |
Routt County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Routt County Fire | County Fire 1 Dispatch | 11659 | 2d8b | D |
| Routt County Fire | West Routt Tactical | 11661 | 2d8d | D |
| Routt County Fire | North Routt Fire Tactical | 11663 | 2d8f | D |
| Routt County Fire | Yampa Town Fire Tactical | 11664 | 2d90 | D |
| Routt County Fire | County Fire 2 Response | 11665 | 2d91 | D |
| Routt County Fire | County Search & Rescue | 11666 | 2d92 | D |
Radio system sites in Routt County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Routt County
Common questions
What frequency does the fire department use in Routt County?
Fire dispatch channels listed for Routt County: Routt County Fire 154.3700 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Routt County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Routt County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Routt County?
For Routt County, start with the Buffalo Pass site of State of Colorado DTRS. Its control channels are 851.7625, 852.0625, 852.325 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Routt County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Routt County are marked encrypted.
Are Routt County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Routt County are marked encrypted.