Skip to content

Park County Fire and EMS Frequencies

Park County in Colorado has 8 countywide conventional frequencies and 5 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Park County Fire and EMS Frequencies

Quick answer: Fire dispatch for Park County: Park County Fire 154.0850 MHz, narrow FM, 107.2 PL. Trunked: State of Colorado DTRS, for example Park County Fire talkgroup 1111 (hex 457).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Park County, start with the Badger Mountain site of State of Colorado DTRS. Its control channels: 851.85, 852.725, 853.1375 MHz.

Data updated .

Park County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Park County FireFire/EMS Dispatch154.0850107.2 PLFMNWPSZ526

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Park County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Park County FireLake George Fire Protection District (Badger Mtn)151.1525
In 156.1050
FMNWRVQ779
Park County FireHartsel Fire Protection District154.1450
In 150.7825
FMNWPVL996
Park County FireNorth-West Fire Protection District (Fairplay)154.2050
In 153.8300
FMNWPGY669
Park County FireJefferson-Como Fire Protection District (Como)154.2200141.3 PLFMNWPGY662
Park County FireHartsel Fire Protection Tactical154.3625FMNWPVL996
Park County FirePlatte Canyon Fire Protection District (Bailey)154.4300
In 154.1300
156.7 PLFMNWYR847
Park County FireSouthern Park County Fire Protection District (Dicks Peak)159.4500
In 156.0900
FMNWQBI654

Park County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Park County FireDistrict 5 Operations (Bailey Platte Canyon Fire Protection District Tones)1111457D
Park County FireDistrict 6 Operations (Jefferson-Como Fire Protection District Tones)1112458D
Park County FireDistrict 8 Operations (Lake George Fire Protection District Tones)111445aD
Park County FireDistrict 9 Operations (Guffey Southern Park County Fire Protection District Tones)111545bD
Park County FireSearch and Rescue113046aD

Radio system sites in Park County

Program the control channel first; your scanner finds the voice channels from it.

Badger Mountain · State of Colorado DTRS
RFSS 1 · Site 45 (hex 2D) · NAC D1D
Control 851.85, 852.725, 853.1375, 853.3125
Voice 851.2375, 857.0875, 857.6625, 859.0875
Sacramento Mountain · State of Colorado DTRS
RFSS 1 · Site 46 (hex 2E) · NAC D1F
Control 851.825, 852.3875, 852.925, 853.525
Voice 851.3, 856.6875
Mount Bailey · State of Colorado DTRS
RFSS 1 · Site 54 (hex 36) · NAC D16
Control 851.425, 852.25, 853.1875, 853.9875
Voice 851.175, 854.9625
Kenosha Pass · State of Colorado DTRS
RFSS 1 · Site 76 (hex 4C)
Control 769.69375, 769.94375, 770.19375, 770.44375
Voice 769.19375, 769.44375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Park County

Common questions

What frequency does the fire department use in Park County?

Fire dispatch channels listed for Park County: Park County Fire 154.0850 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Park County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Park County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Park County?

For Park County, start with the Badger Mountain site of State of Colorado DTRS. Its control channels are 851.85, 852.725, 853.1375, 853.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Park County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Park County are marked encrypted.

Are Park County fire and EMS talkgroups encrypted?

None of the 5 talkgroups listed for Park County are marked encrypted.