About Ouray County Fire and EMS Frequencies
Quick answer: Fire dispatch for Ouray County: Log Hill Fire Protection District 154.3100 MHz, narrow FM, 107.2 PL; Ouray County Fire 155.8200 MHz, narrow FM, 167.9 PL. EMS dispatch for Ouray County: Ouray County EMS 155.0250 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Ouray County EMS talkgroup 8535 (hex 2157).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Ouray County, start with the Log Hill site of State of Colorado DTRS. Its control channels: 852.775, 853.0875, 853.325 MHz.
Data updated .
Ouray County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Log Hill Fire Protection District | Log Hill Fire Dispatch | 154.3100 In 158.8650 | 107.2 PL | FMN | KLX227 |
| Ouray County Fire | EMS, Mountain Rescue and Fire Paging | 155.8200 In 155.0250 | 167.9 PL | FMN | WZX512 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Ouray County EMS | Ouray County EMS Dispatch | 155.0250 | FMN | — |
Ouray County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Ouray County EMS | Ouray County EMS – Tactical Channel | 8535 | 2157 | D |
Radio system sites in Ouray County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Ouray County
Common questions
What frequency does the fire department use in Ouray County?
Fire dispatch channels listed for Ouray County: Log Hill Fire Protection District 154.3100 MHz, narrow FM, 107.2 PL; Ouray County Fire 155.8200 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Ouray County?
EMS dispatch channels listed for Ouray County: Ouray County EMS 155.0250 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Ouray County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Ouray County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Ouray County?
For Ouray County, start with the Log Hill site of State of Colorado DTRS. Its control channels are 852.775, 853.0875, 853.325, 853.725 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Ouray County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Ouray County are marked encrypted.
Are Ouray County fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Ouray County are marked encrypted.