Skip to content

Moffat County Fire and EMS Frequencies

Moffat County in Colorado has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Moffat County Fire and EMS Frequencies

Quick answer: Fire dispatch for Moffat County: Moffat County Fire 154.2200 MHz, narrow FM, 146.2 PL. EMS dispatch for Moffat County: Moffat County EMS 154.2200 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Moffat County EMS talkgroup 8356 (hex 20a4).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Moffat County, start with the Vermillion Bluffs site of State of Colorado DTRS. Its control channels: 852.2875, 852.5625, 852.8125 MHz.

Data updated .

Moffat County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Moffat County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Moffat County FireMoffat County Fire – Dispatch154.2200
In 154.4300
146.2 PLFMNWNIA959

EMS Dispatch

EMS Dispatch frequencies for Moffat County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Moffat County EMSMoffat County EMS – Dispatch (Memorial Hosptial Crag)154.2200FMNWNIA959

Moffat County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Moffat County EMSEMS Auxiliary835620a4D
Moffat County EMSMoffat County EMS – Tactical Channel836220aaD

Radio system sites in Moffat County

Program the control channel first; your scanner finds the voice channels from it.

Vermillion Bluffs · State of Colorado DTRS
RFSS 2 · Site 16 (hex 10) · NAC D10
Control 852.2875, 852.5625, 852.8125
Voice 851.1125, 851.4375
Cedar Mountain · State of Colorado DTRS
RFSS 2 · Site 21 (hex 15) · NAC D11
Control 852.95, 853.1625, 853.45, 853.975
Voice 851.4625, 852.45, 854.4875
Juniper Mountain · State of Colorado DTRS
RFSS 2 · Site 25 (hex 19) · NAC D19
Control 852.0875, 852.2375, 852.6625, 853.55
Voice 851.625, 854.6875
Harper Hill · State of Colorado DTRS
RFSS 2 · Site 39 (hex 27) · NAC D17
Control 853.1875, 853.4625, 853.6625, 853.825
Voice 852.6375
Bakers Peak · State of Colorado DTRS
RFSS 2 · Site 41 (hex 29) · NAC D19
Control 852.625, 853.6125, 853.85
Voice 851.1625, 851.8625
Craig · State of Colorado DTRS
RFSS 2 · Site 91 (hex 5B) · NAC D1B
Control 852.775, 853.0875, 853.325, 853.725
Voice 851.2625, 852.25, 854.1125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Moffat County

Common questions

What frequency does the fire department use in Moffat County?

Fire dispatch channels listed for Moffat County: Moffat County Fire 154.2200 MHz, narrow FM, 146.2 PL.

What frequency does EMS or the ambulance service use in Moffat County?

EMS dispatch channels listed for Moffat County: Moffat County EMS 154.2200 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Moffat County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Moffat County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Moffat County?

For Moffat County, start with the Vermillion Bluffs site of State of Colorado DTRS. Its control channels are 852.2875, 852.5625, 852.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Moffat County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Moffat County are marked encrypted.

Are Moffat County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Moffat County are marked encrypted.