Skip to content

Logan County Fire and EMS Frequencies

Logan County in Colorado has 0 countywide conventional frequencies and 7 countywide talkgroups in our database. Use the list of 8 cities and communities below for local fire departments and EMS agencies.

About Logan County Fire and EMS Frequencies

Quick answer: Trunked: State of Colorado DTRS, for example Logan County Fire talkgroup 4225 (hex 1081).

  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Logan County, start with the Reiradon Hill site of State of Colorado DTRS. Its control channels: 852.325, 852.8875, 853.35 MHz.

Data updated .

Logan County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Logan County FireLogan County Fire – Dispatch42251081D
Logan County FireLogan County Fire – Fire Ground42261082D
Logan County FireLogan County Fire – Fire Ground42271083D
Logan County FireLogan County Fire – Fire Ground42281084D
Logan County FireLogan County Fire – Fire Ground42291085D
Logan County EMSLogan County EMS – Dispatch42321088D
Logan County EMSLogan County EMS – Tactical Channel42331089D

Radio system sites in Logan County

Program the control channel first; your scanner finds the voice channels from it.

Reiradon Hill · State of Colorado DTRS
RFSS 3 · Site 18 (hex 12) · NAC D12
Control 852.325, 852.8875, 853.35
Voice 851.0625, 851.3125, 851.7625, 852.0625, 852.5875, 858.0875
Peetz · State of Colorado DTRS
RFSS 3 · Site 28 (hex 1C) · NAC D1C
Control 851.9875, 852.4875, 852.9875, 853.4875
Voice 851.4875, 857.1375
Sterling Correctional · State of Colorado DTRS
RFSS 3 · Site 57 (hex 39) · NAC D19
Control 852.4625, 852.9625, 853.4625, 853.9625
Voice 851.4625, 851.9625, 854.2625, 854.5625, 854.9625, 859.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Logan County

Common questions

Do fire departments and EMS use a trunked radio system in Logan County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 7 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Logan County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Logan County?

For Logan County, start with the Reiradon Hill site of State of Colorado DTRS. Its control channels are 852.325, 852.8875, 853.35 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Logan County fire and EMS talkgroups encrypted?

None of the 7 talkgroups listed for Logan County are marked encrypted.