About Las Animas County Fire and EMS Frequencies
Quick answer: Fire dispatch for Las Animas County: Las Animas County Fire 154.4150 MHz, narrow FM, 107.2 PL. Trunked: State of Colorado DTRS, for example Las Animas County Fire talkgroup 214 (hex d6).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Las Animas County, start with the Kim site of State of Colorado DTRS. Its control channels: 851.725, 852.7875, 853.05 MHz.
Data updated .
Las Animas County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Las Animas County Fire | Las Animas County Fire – Dispatch | 154.4150 In 154.0100 | 107.2 PL | FMN | WPVT811 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Las Animas County Fire | Las Animas County Fire – Fire Ground | 154.3925 | 156.7 PL | FMN | WPYS613 |
Las Animas County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Las Animas County Fire | Fire/EMS Dispatch | 214 | d6 | D |
| Las Animas County Fire | Las Animas County Fire – Dispatch | 1208 | 4b8 | D |
| Las Animas County Fire | Fire/EMS Tactical | 215 | d7 | D |
| Las Animas County Fire | Las Animas County Fire – Fire Ground | 1209 | 4b9 | D |
| Las Animas County Fire | Las Animas County Fire – Fire Ground | 1210 | 4ba | D |
| Las Animas County Fire | Las Animas County Fire – Fire Ground | 1211 | 4bb | D |
Radio system sites in Las Animas County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Las Animas County
Common questions
What frequency does the fire department use in Las Animas County?
Fire dispatch channels listed for Las Animas County: Las Animas County Fire 154.4150 MHz, narrow FM, 107.2 PL.
Do fire departments and EMS use a trunked radio system in Las Animas County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Las Animas County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Las Animas County?
For Las Animas County, start with the Kim site of State of Colorado DTRS. Its control channels are 851.725, 852.7875, 853.05, 853.2 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Las Animas County fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Las Animas County are marked encrypted.
Are Las Animas County fire and EMS talkgroups encrypted?
None of the 6 talkgroups listed for Las Animas County are marked encrypted.