Skip to content

Lake County Fire and EMS Frequencies

Lake County in Colorado has 3 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Lake County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lake County: Lake County Fire 156.1350 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Lake County Fire talkgroup 11801 (hex 2e19).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Lake County, start with the Granite site of State of Colorado DTRS. Its control channels: 852.575, 852.85, 853.1 MHz.

Data updated .

Lake County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FireLake County Fire-EMS Paging156.1350FMNWPYQ811

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FireLake County Fire Tactical154.175067.0 PLFMNWNVJ851
Lake County FireLake County Fire Tactical154.3550123.0 PLFMNWNVJ851

Lake County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Lake County FireLE/Fire Dispatch (11801)118012e19D
Lake County FireLE/Fire Dispatch (11802)118022e1aD

Radio system sites in Lake County

Program the control channel first; your scanner finds the voice channels from it.

Granite · State of Colorado DTRS
RFSS 2 · Site 33 (hex 21) · NAC D11
Control 852.575, 852.85, 853.1, 853.6375
Voice 851.575, 852.1875
Leadville · State of Colorado DTRS
RFSS 2 · Site 34 (hex 22) · NAC D10
Control 769.70625, 769.95625, 770.20625, 770.45625
Voice 769.20625, 769.45625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lake County

Common questions

What frequency does the fire department use in Lake County?

Fire dispatch channels listed for Lake County: Lake County Fire 156.1350 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Lake County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Lake County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Lake County?

For Lake County, start with the Granite site of State of Colorado DTRS. Its control channels are 852.575, 852.85, 853.1, 853.6375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lake County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Lake County are marked encrypted.

Are Lake County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Lake County are marked encrypted.