Skip to content

Kiowa County Fire and EMS Frequencies

Kiowa County in Colorado has 3 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Kiowa County Fire and EMS Frequencies

Quick answer: Fire dispatch for Kiowa County: Kiowa County Fire 153.9950 MHz, narrow FM, 118.8 PL. Trunked: State of Colorado DTRS, for example Kiowa County Fire talkgroup 317 (hex 13d).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Kiowa County, start with the Sheridan Lake site of State of Colorado DTRS. Its control channels: 851.2875, 852.05, 853.075 MHz.

Data updated .

Kiowa County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Kiowa County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kiowa County FireFire District 4153.9950
In 151.0400
118.8 PLFMNWPDU950
Kiowa County FireFire District 8153.9950
In 151.0400
162.2 PLFMNWPDU950
Kiowa County FireWiley Fire153.9950
In 151.0400
100.0 PLFMNWPDU950

Kiowa County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Kiowa County FireKiowa County Fire – Dispatch31713dD
Kiowa County EMSKiowa County EMS – Dispatch31813eD

Radio system sites in Kiowa County

Program the control channel first; your scanner finds the voice channels from it.

Sheridan Lake · State of Colorado DTRS
RFSS 6 · Site 26 (hex 1A) · NAC D1A
Control 851.2875, 852.05, 853.075, 853.7625
Voice 851.05
Haswell · State of Colorado DTRS
RFSS 6 · Site 36 (hex 24) · NAC D14
Control 852.975, 853.25, 853.5, 853.95
Voice 852.1375, 857.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Kiowa County

Common questions

What frequency does the fire department use in Kiowa County?

Fire dispatch channels listed for Kiowa County: Kiowa County Fire 153.9950 MHz, narrow FM, 118.8 PL.

Do fire departments and EMS use a trunked radio system in Kiowa County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Kiowa County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Kiowa County?

For Kiowa County, start with the Sheridan Lake site of State of Colorado DTRS. Its control channels are 851.2875, 852.05, 853.075, 853.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Kiowa County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Kiowa County are marked encrypted.

Are Kiowa County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Kiowa County are marked encrypted.