About Gunnison County Fire and EMS Frequencies
Quick answer: Fire dispatch for Gunnison County: Gunnison County Fire 154.4300 MHz, narrow FM, 151.4 PL. Trunked: State of Colorado DTRS, for example Gunnison County Fire talkgroup 8489 (hex 2129).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gunnison County, start with the Little Blue Creek site of State of Colorado DTRS. Its control channels: 852.5375, 852.8375, 853.15 MHz.
Data updated .
Gunnison County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gunnison County Fire | Gunnison County Fire – Dispatch | 154.4300 In 153.7700 | 151.4 PL | FMN | KNCE405 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gunnison County Hospital | Gunnison Valley Hospital | 151.1150 In 154.4000 | FMN | — | |
| Gunnison County Hospital | Gunnison Valley Hospital | 155.4000 | 71.9 PL | FMN | KVG860 |
Gunnison County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gunnison County Fire | West Elk Mountain Rescue | 8489 | 2129 | D |
| Gunnison County Fire | Western Colorado University Mountain Rescue Team | 8491 | 212b | D |
| Gunnison County EMS | Gunnison County EMS – Dispatch | 8519 | 2147 | D |
Radio system sites in Gunnison County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Gunnison County
Common questions
What frequency does the fire department use in Gunnison County?
Fire dispatch channels listed for Gunnison County: Gunnison County Fire 154.4300 MHz, narrow FM, 151.4 PL.
Do fire departments and EMS use a trunked radio system in Gunnison County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gunnison County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gunnison County?
For Gunnison County, start with the Little Blue Creek site of State of Colorado DTRS. Its control channels are 852.5375, 852.8375, 853.15 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gunnison County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Gunnison County are marked encrypted.
Are Gunnison County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Gunnison County are marked encrypted.