About Grand County Fire and EMS Frequencies
Quick answer: Fire dispatch for Grand County: Grand County Fire/EMS 154.8000 MHz, narrow FM, 127.3 PL. Trunked: State of Colorado DTRS, for example Grand County Fire talkgroup 8899 (hex 22c3).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Grand County, start with the Mines Peak site of State of Colorado DTRS. Its control channels: 852.7875, 853.225, 853.575 MHz.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Grand County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grand County Fire/EMS | Fire/EMS West | 154.8000 In 158.7300 | 127.3 PL | FMN | WPPZ601 |
| Grand County Fire/EMS | Fire/EMS Dispatch | 155.1150 In 153.9950 | 156.7 PL | FMN | WNFR774 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grand County Fire/EMS | Grand Fire Protection District 2 (Winter Park area) | 154.1600 | 156.7 PL | FMN | KNHE594 |
| Grand County Fire/EMS | Kremmling Fire Tactical | 154.3100 In 150.7750 | 156.7 PL | FMN | WPZB951 |
| Grand County Fire/EMS | Grand Lake Fire Protection District Tactical | 154.3400 In 151.0700 | 167.9 PL | FMN | WPEH967 |
| Grand County Fire/EMS | Grand Fire Protection District 1 (Granby area) | 154.4450 | FMN | WPCG698 | |
| Mountain Rescue Association Search and Rescue | Mountain Rescue Association Search and Rescue | 155.1600 | FMN | WNAJ871 | |
| Search and Rescue | Search and Rescue | 153.8750 In 158.9400 | FMN | WQBU856 |
Grand County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grand County Fire | Search and Rescue | 8899 | 22c3 | D |
| Grand County Fire | Search and Rescue Tactical | 8900 | 22c4 | D |
| Grand County Fire | Search and Rescue Tactical | 8901 | 22c5 | D |
3 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Grand County Fire | LE/Fire/EMS Dispatch | 8886 | 22b6 | D Encrypted |
| Grand County EMS | Grand County EMS – Tactical Channel | 8887 | 22b7 | D Encrypted |
| Grand County EMS | Grand County EMS – Tactical Channel | 8888 | 22b8 | D Encrypted |
Radio system sites in Grand County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Grand County
Common questions
What frequency does the fire department use in Grand County?
Fire dispatch channels listed for Grand County: Grand County Fire/EMS 154.8000 MHz, narrow FM, 127.3 PL.
Do fire departments and EMS use a trunked radio system in Grand County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Grand County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Grand County?
For Grand County, start with the Mines Peak site of State of Colorado DTRS. Its control channels are 852.7875, 853.225, 853.575 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Grand County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Grand County are marked encrypted.
Are Grand County fire and EMS talkgroups encrypted?
3 of the 6 talkgroups listed for Grand County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.