About Gilpin County Fire and EMS Frequencies
Quick answer: Fire dispatch for Gilpin County: Gilpin County Fire 153.8450 MHz, narrow FM, 100.0 PL. Trunked: State of Colorado DTRS, for example Gilpin County Fire talkgroup 3131 (hex c3b).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gilpin County, start with the Thorodin site of State of Colorado DTRS. Its control channels: 853.1625, 853.55, 853.975 MHz.
Data updated .
Gilpin County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gilpin County Fire | Gilpin County Fire Operations | 153.8450 In 156.0150 | 100.0 PL | FMN | WQSY506 |
| Gilpin County Fire | Black Hawk Fire Department, Central City Fire Department, Timberline Fire Department, Gilpin EMS Dispatch | 154.0250 In 158.7300 | 100.0 PL | FMN | WQSM422 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Timberline Fire Protection District | Timberline Fire Protection District | 154.1450 In 151.1525 | 100.0 PL | FM | — |
Gilpin County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gilpin County Fire | Gilpin County Fire – Dispatch | 3131 | c3b | D |
| Gilpin County Fire | Fire Paging | 3142 | c46 | D |
| Gilpin County Fire | Gilpin County Fire – Tactical Channel | 3132 | c3c | D |
| Gilpin County Fire | Timberline Fire Tactical | 3134 | c3e | D |
Radio system sites in Gilpin County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Gilpin County
Common questions
What frequency does the fire department use in Gilpin County?
Fire dispatch channels listed for Gilpin County: Gilpin County Fire 153.8450 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Gilpin County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gilpin County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gilpin County?
For Gilpin County, start with the Thorodin site of State of Colorado DTRS. Its control channels are 853.1625, 853.55, 853.975 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gilpin County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Gilpin County are marked encrypted.
Are Gilpin County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Gilpin County are marked encrypted.