Skip to content

Elbert County Fire and EMS Frequencies

Elbert County in Colorado has 4 countywide conventional frequencies and 11 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Elbert County Fire and EMS Frequencies

Quick answer: Fire dispatch for Elbert County: Big Sandy Fire Protection District 151.2275 MHz, FM, 203.5 PL; North Central Fire Protection District 153.9950 MHz, FM, 146.2 PL; Rattlesnake Fire Protection District 155.3850 MHz, FM, 103.5 PL. Trunked: State of Colorado DTRS, for example Elbert County Fire talkgroup 515 (hex 203).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Elbert County, start with the Simla site of State of Colorado DTRS. Its control channels: 851.8375, 852.825, 853.0375 MHz.

Data updated .

Elbert County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Elbert County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Big Sandy Fire Protection DistrictFire Protection District151.2275
In 159.3675
203.5 PLFMWQIL460
North Central Fire Protection DistrictNorth Central Fire Protection District153.9950
In 151.0400
146.2 PLFMWPDU920
Rattlesnake Fire Protection DistrictRattlesnake Fire Protection District Dispatch155.3850
In 150.8050
103.5 PLFMWNJE750

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Elbert County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rattlesnake Fire Protection DistrictRattlesnake Fire Protection District Tactical158.8800FMWNJE750

Elbert County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Elbert County FireFire Operations515203D
Elbert County FireFire Operations 4 Agate516204D
Elbert County FireFire Operations519207D
Elbert County FireFire Operations520208D
Elbert County FireFire Operations521209D
Elbert County FireFire Operations52620eD
Elbert County FireFire Operations52720fD
Elbert County FireFire Operations528210D
Elbert County FireFire Administration518206D
Elbert County FireFire Operations 9 Training52520dD
Elbert County FireFire Operations 10 Training529211D

Radio system sites in Elbert County

Program the control channel first; your scanner finds the voice channels from it.

Simla · State of Colorado DTRS
RFSS 1 · Site 23 (hex 17) · NAC D17
Control 851.8375, 852.825, 853.0375, 853.2875
Voice 851.1375, 851.325
Rattlesnake · State of Colorado DTRS
RFSS 1 · Site 43 (hex 2B) · NAC D1B
Control 772.05625, 772.83125, 773.39375, 774.48125
Voice 769.54375, 770.33125, 771.03125, 771.33125
Kiowa · State of Colorado DTRS
RFSS 1 · Site 72 (hex 48) · NAC D18
Control 772.19375, 772.64375, 772.89375, 773.19375, 774.69375
Voice 771.39375, 771.66875
Silo · State of Colorado DTRS
RFSS 1 · Site 74 (hex 4A) · NAC D1A
Control 772.63125, 772.88125, 773.18125, 774.68125
Voice 769.83125, 771.38125, 771.65625, 772.18125
Cedar Point · State of Colorado DTRS
RFSS 1 · Site 75 (hex 4B) · NAC D1B
Control 773.05625, 773.30625, 773.55625, 773.80625
Voice 770.68125, 770.93125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Elbert County

Common questions

What frequency does the fire department use in Elbert County?

Fire dispatch channels listed for Elbert County: Big Sandy Fire Protection District 151.2275 MHz, FM, 203.5 PL; North Central Fire Protection District 153.9950 MHz, FM, 146.2 PL; Rattlesnake Fire Protection District 155.3850 MHz, FM, 103.5 PL.

Do fire departments and EMS use a trunked radio system in Elbert County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 11 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Elbert County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Elbert County?

For Elbert County, start with the Simla site of State of Colorado DTRS. Its control channels are 851.8375, 852.825, 853.0375, 853.2875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Elbert County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Elbert County are marked encrypted.

Are Elbert County fire and EMS talkgroups encrypted?

None of the 11 talkgroups listed for Elbert County are marked encrypted.