Skip to content

Dolores County Fire and EMS Frequencies

Dolores County in Colorado has 1 countywide conventional frequency and 1 countywide talkgroup in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Dolores County Fire and EMS Frequencies

Quick answer: Fire dispatch for Dolores County: Dolores County Fire 158.9700 MHz, narrow FM, 107.2 PL. Trunked: State of Colorado DTRS, for example Dolores County Fire talkgroup 3673 (hex e59).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Dolores County, start with the Rico site of State of Colorado DTRS. Its control channels: 851.9625, 852.4625, 852.9625 MHz.

Data updated .

Dolores County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Dolores County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dolores County FireCounty Fire Districts158.9700
In 153.9350
107.2 PLFMNWNZJ551

Dolores County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Dolores County FireDolores County Fire – Dispatch3673e59D

Radio system sites in Dolores County

Program the control channel first; your scanner finds the voice channels from it.

Rico · State of Colorado DTRS
RFSS 5 · Site 48 (hex 30) · NAC D10
Control 851.9625, 852.4625, 852.9625, 853.9625
Voice 851.4625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Dolores County

Common questions

What frequency does the fire department use in Dolores County?

Fire dispatch channels listed for Dolores County: Dolores County Fire 158.9700 MHz, narrow FM, 107.2 PL.

Do fire departments and EMS use a trunked radio system in Dolores County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Dolores County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Dolores County?

For Dolores County, start with the Rico site of State of Colorado DTRS. Its control channels are 851.9625, 852.4625, 852.9625, 853.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Dolores County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Dolores County are marked encrypted.

Are Dolores County fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Dolores County are marked encrypted.