Skip to content

Denver County Fire and EMS Frequencies

Denver County in Colorado has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 1 city and community below for local fire departments and EMS agencies.

About Denver County Fire and EMS Frequencies

Quick answer: Fire dispatch for Denver County: Denver Public Safety 154.0700 MHz, narrow FM, 103.5 PL (old).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Denver County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Denver County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Denver Public Safety OldFire Station Tones154.0700103.5 PLFMNWSL515

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Denver County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Denver Public SafetyRadio Fire Boxes72.7600FMWJZ71

Radio system sites in Denver County

Program the control channel first; your scanner finds the voice channels from it.

Denver Simulcast · Denver
RFSS 1 · Site 1 (hex 1) · NAC 9C1
Control 856.1375, 859.2125, 859.6125, 859.7125
Voice 854.0625, 854.5625, 855.4625, 855.7375, 856.2375, 856.6375, 856.7125, 857.0625, 857.4625, 857.7375, 858.1375, 858.2125, 858.7375
Mount Morrison · Denver
RFSS 1 · Site 2 (hex 2) · NAC 9C2
Control 856.7375, 857.1375, 858.7125, 859.2625
Voice 852.775, 853.325, 853.8625, 854.4375, 855.2375, 855.4875, 855.9875, 856.2125
DRDC CF · State of Colorado DTRS
RFSS 1 · Site 9 (hex 9) · NAC D19
Control 852.7, 853.475, 853.675, 853.9625
Voice 851.15, 851.95, 854.2625, 854.4625, 854.7, 856.1625, 858.1625
Denver Tx Building (DTB) · State of Colorado DTRS
RFSS 1 · Site 20 (hex 14) · NAC D14
Control 852.5625, 852.8125, 853.7
Voice 770.28125, 772.55625, 773.90625, 774.30625, 774.55625, 774.80625, 851.4375, 852.3625, 852.9625, 853.7375
DTB Test · State of Colorado DTRS
RFSS 1 · Site 67 (hex 43) · NAC D13
Control 852.7625
Voice 851.325
DIA Airport Office Building (RTD) · State of Colorado DTRS
RFSS 1 · Site 68 (hex 44) · NAC D14
Control 771.71875, 772.14375, 772.40625, 773.49375
Voice 770.59375, 771.21875
Auraria Campus · State of Colorado DTRS
RFSS 1 · Site 70 (hex 46) · NAC D16
Control 773.03125, 773.28125, 773.53125, 773.78125
Voice 769.15625, 769.40625, 769.65625, 769.90625, 770.15625, 770.40625, 770.65625, 770.90625
State Capitol · State of Colorado DTRS
RFSS 1 · Site 71 (hex 47) · NAC D17
Control 774.03125, 774.28125, 774.65625, 774.90625
Voice 769.30625, 769.53125, 769.78125, 770.58125, 771.45625, 772.20625, 773.23125, 773.48125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Denver County

Common questions

What frequency does the fire department use in Denver County?

Fire dispatch channels listed for Denver County: Denver Public Safety 154.0700 MHz, narrow FM, 103.5 PL (old).

What scanner do I need to listen to fire and EMS in Denver County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Denver County?

For Denver County, start with the Denver Simulcast site of Denver. Its control channels are 856.1375, 859.2125, 859.6125, 859.7125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Denver County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Denver County are marked encrypted.