About Cheyenne County Fire and EMS Frequencies
Quick answer: Trunked: State of Colorado DTRS, for example Cheyenne County Fire talkgroup 399 (hex 18f).
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Cheyenne County, start with the Firstview site of State of Colorado DTRS. Its control channels: 852.8875, 853.35, 853.65 MHz.
Data updated .
Cheyenne County trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Cheyenne County Fire | Cheyenne County Fire – Dispatch | 399 | 18f | D |
| Cheyenne County Fire | Cheyenne County Fire – Fire Ground | 400 | 190 | D |
| Cheyenne County Fire | Hazmat | 402 | 192 | D |
| Cheyenne County EMS | Cheyenne County EMS – Dispatch | 397 | 18d | D |
| Cheyenne County EMS | Cheyenne County EMS – Alternate | 398 | 18e | D |
Radio system sites in Cheyenne County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Cheyenne County
Common questions
Do fire departments and EMS use a trunked radio system in Cheyenne County?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Cheyenne County?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Cheyenne County?
For Cheyenne County, start with the Firstview site of State of Colorado DTRS. Its control channels are 852.8875, 853.35, 853.65, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Cheyenne County fire and EMS talkgroups encrypted?
None of the 5 talkgroups listed for Cheyenne County are marked encrypted.