Skip to content

Walsh Fire and EMS Frequencies

Walsh in Baca County, Colorado has 15 conventional frequencies and 1 trunked talkgroup listed for local fire and EMS agencies. The closest trunked radio site we have is Springfield (State of Colorado DTRS), about 20 miles away.

About Walsh Fire and EMS Frequencies

Quick answer: Fire dispatch for Walsh: Walsh Fire 855.9625 MHz, narrow FM, 343 DPL. Trunked: State of Colorado DTRS, for example Walsh Fire talkgroup 353 (hex 161).

  • 11 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Walsh, start with the Springfield site of State of Colorado DTRS, about 20 miles away. Its control channels: 851.3125, 851.7625, 852.0625 MHz.
  • 2 listed entries are marked encrypted. No scanner can decode encrypted audio.

Data updated .

Walsh conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Walsh
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walsh FireWalsh EMS Dispatch855.9625
In 810.9625
343 DPLFMNWQFB541

EMS Tactical

EMS Tactical frequencies for Walsh
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walsh EMSWalsh EMS – Tactical Channel153.9650118.8 PLFMNWQRN661
Walsh EMSWalsh EMS VHF154.1600
In 159.1650
506 DPLFMNWQRN661
Walsh EMSBaca North (Two Buttes)453.3375
In 458.3375
506 DPLFMNWQZU858
Walsh EMSBaca West (Tator Butte)453.4125
In 458.4125
506 DPLFMNWRAC515
Walsh EMSBaca Manter (Manter KS)453.5625
In 458.5250
506 DPLFMNWRAC515
Walsh EMSBaca South (Mt Carmel)453.6875
In 458.6875
506 DPLFMNWQZU858
Walsh EMSVilas Mutual Aid453.7375
In 458.7375
506 DPLFMNWRTA658
Walsh EMSVilas453.7375
In 458.7375
CC 15 · TG 401 · SL *DMRWRTA658
Walsh EMSBaca Frick453.7625
In 458.7625
506 DPLFMNWRTA656
Walsh EMSFrick453.7625
In 458.7625
CC 15 · TG 401 · SL *DMRWRTA656
Walsh EMSWalsh EMS East (Walsh)460.1875
In 465.1875
118.8 PLFMNWQRN661
Walsh EMSEast – Walsh460.1875
In 465.1875
DMR EncryptedWQRN661
Walsh EMSBaca Central (Springfield)460.4625
In 465.4625
506 DPLFMNWRKE824
Walsh EMSCentral (Springfield)460.4625
In 465.4625
DMR EncryptedWRKE824

Walsh trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Walsh FireWalsh Fire/EMS353161D

Nearest trunked radio sites

Distances are measured from the center of Walsh.

Springfield · State of Colorado DTRS
RFSS 6 · Site 41 (hex 29) · NAC D19 · about 20 mi away
Control 851.3125, 851.7625, 852.0625, 852.325
Voice 851.0625, 856.1875
Mt Carmel · State of Colorado DTRS
RFSS 6 · Site 27 (hex 1B) · NAC D1B · about 22 mi away
Control 852.425, 852.8, 853.3875, 853.9875
Voice 851.6125
Toonerville Air (Aircraft Only) · State of Colorado DTRS
RFSS 6 · Site 74 (hex 4A) · NAC D1A · about 39 mi away
Control 774.29375, 774.54375, 774.79375
Voice 774.04375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Walsh?

Fire dispatch channels listed for Walsh: Walsh Fire 855.9625 MHz, narrow FM, 343 DPL.

Do fire departments and EMS use a trunked radio system in Walsh?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Walsh?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Walsh?

For Walsh, start with the Springfield site of State of Colorado DTRS. Its control channels are 851.3125, 851.7625, 852.0625, 852.325 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Walsh fire and EMS frequencies encrypted?

2 of the 15 conventional frequencies listed for Walsh are marked encrypted; a scanner cannot decode encrypted audio.

Are Walsh fire and EMS talkgroups encrypted?

None of the 1 talkgroups listed for Walsh are marked encrypted.