Skip to content

Alamosa County Fire and EMS Frequencies

Alamosa County in Colorado has 0 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 3 cities and communities below for local fire departments and EMS agencies.

About Alamosa County Fire and EMS Frequencies

Quick answer: Trunked: State of Colorado DTRS, for example Alamosa County Fire talkgroup 8090 (hex 1f9a).

  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Alamosa County, start with the Alamosa site of State of Colorado DTRS. Its control channels: 852.3875, 852.675, 852.925 MHz.

Data updated .

Alamosa County trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Alamosa County FireARCC 5 – San Luis Valley Fire/EMS80901f9aD
Alamosa County FireFire EMS East Dispatch81811ff5D
Alamosa County FireFire EMS West Dispatch81831ff7D
Alamosa County FireFire EMS East Tactical81821ff6D
Alamosa County FireFire EMS West Tactical81841ff8D
Alamosa County FireSan Luis Valley Hazmat81962004D

Radio system sites in Alamosa County

Program the control channel first; your scanner finds the voice channels from it.

Alamosa · State of Colorado DTRS
RFSS 6 · Site 52 (hex 34) · NAC D14
Control 852.3875, 852.675, 852.925, 853.525
Voice 851.3, 851.825, 856.0875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Alamosa County

Common questions

Do fire departments and EMS use a trunked radio system in Alamosa County?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Alamosa County?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Alamosa County?

For Alamosa County, start with the Alamosa site of State of Colorado DTRS. Its control channels are 852.3875, 852.675, 852.925, 853.525 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Alamosa County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Alamosa County are marked encrypted.